Feature(may vary by option.)
●【Good Sealing Performance】: Equipped with three layers of rubber sealing rings, it greatly enhances its sealing performance and can effectively prevent oil leakage, making your user experience better.
●【High Precision】: The oil pan, stator, rotor pair, and output shaft inside ensure the high precision of the product and make your use more accurate and error-free.
●【Strong Compression Resistance】: The bearing has strong radial force and high pressure resistance, which can effectively extend the service life of the product.
●【Strong Power】: High speed (BMR-200: 284rpm(continuous), 339rpm(discontinuous); BMR-160: 354rpm(continuous), 425rpm(discontinuous) and high torque ( BMR-200: 285N * M (continuous) 319N * M(discontinuous); BMR-160: 228N * M (continuous), 261N * M(discontinuous) bring you stronger power, thus improving your efficiency.
●【Powerful Function】: As an executive component of the hydraulic system, the motor can effectively convert the liquid pressure energy provided by the hydraulic pump into the mechanical energy (torque and speed) of its output shaft, thus providing sufficient energy.
[200]
[160]
Description
Specification
Model: Diamond Flange BMR-160/ BMR-200
Displacement: 160/200CC
Material: Cast Iron, Rubber
Surface Treatment: Painting
Assembly Required: Yes
Mount Type: Mechanical Equipment
Port Size: G1/2
BMR200:
Net Weight: 7.9kg/17.42lbs
Gross Weight: 8.5kg/18.743lbs
Package Size: 26*13*10cm/10.24*5.12*3.94inch
Max Speed: 284/339 RPM(Continuous/Discontinuous)
Flow: 57/68 LPM (Continuous/Discontinuous)
Torque N.m: 285/319 (Continuous/Discontinuous)
Pressure Drop:110/124 Bar (Continuous/Discontinuous)
BMR160:
Net Weight: 7.4kg/16.31 lbs
Gross Weight: 8kg/17.64lbs
Package Size: 26*13*10cm/10.24*5.12*3.94inch
Max Speed: 354/425 RPM(Continuous/Discontinuous)
Flow: 57/68 LPM (Continuous/Discontinuous)
Torque N.m: 228/261 (Continuous/Discontinuous)
Pressure Drop:115/124 Bar (Continuous/Discontinuous)
Package Included
1* Hydraulic Motor
Notes
1. We recommend that the normal operating oil temperature is 20~60℃/68-140℉, and the maximum system operating temperature is 90℃/194℉ (not more than one hour). The kinematic viscosity of the oil at 40°C/104℉ is 42-74mm2/s. The hydraulic oil can be selected according to the actual working and ambient temperature.
2. We recommend that the filter precision be 10-30 microns. It is better to add a magnetic block at the bottom of the oil tank to prevent metal chips from entering the system. The solid pollution level of working oil shall not be higher than 19/16.
3. The motor can be used in series or parallel. When the back pressure exceeds 10MPA (the rotating speed is lower than 200RPM), the external drain port must be used for pressure relief. It is better to connect the external drain port directly to the oil tank.