You can enable X10 remote control inside a wired fixture with the X10 PRO Wired-In Inductive Fixture Module. Designed to control incandescent lighting fixtures or inductive loads, the module is compact enough to fit inside a single-gang box, a recessed lighting can, etc. This XPFM module is similar to the XPDF in-line fixture module, except this one supports inductive loads and does not support dimming. NOTE: The module can only be used in fixtures where 60-degree C wiring is permitted. SPECS: Power Requirements: 120 VAC, 60 Hz. Power Rating: 1800W, 15 Amps max. X10 Control: On/Off, All On/Off Capable. Dimmable: No. Max. Operating Temperature: 140 degrees F (60 degrees C). Dimensions: 2.94(L) x 2.06(W) x 1.3(D) inches.