Feature

●Convenient Access - TOPENS HLR01 HomeLink Receiver allows for seamless control of the gate opener through the built-in HomeLink system in the vehicle. Advanced security code technology keeps the gate opener system safe. This integration eliminates the hassle of carrying separate remote controls, providing unmatched convenience. Simply press the HomeLink button to enjoy instant access to your property.
●Easy to Program - Press and hold the HomeLink button for approximately 20 seconds until the status light indicates entering programming mode. Continue to hold the HomeLink button, and place the HLR01 remote (incl.) 2 to 5 inches away from HomeLink, and then press and hold the button on the remote. Keep both buttons held until the status light confirms successful programming. Once programmed, every press of the HomeLink button makes the gate perfectly operate between open-stop-close-stop-open.
●Clever Design - The HLR01 receiver can connect with two gate operators and program with multiple vehicles. Simple wire connection makes installation easy and quick. The HomeLink receiver can be wired to the gate opener system via PORT 1 or PORT 2. Remote control button A is used to control PORT 1, while button B is used to control PORT 2. In addition, the remote control can also be used to control gate operation.
●Wide Compability- Works with all TOPENS gate openers, and is compatible with most third party gate opener or garage door opener whose control board accepts the "Normal Open Dry Contact" signal for the push button. It can be powered by the control board of the gate opener or by the external 12-24VDC power source. Kindly note that the external receiver only works with the gate / garage door openers, and does not support other door access control systems.
●Customer Service and Technical Support - All the TOPENS products come with a 12-month war-ranty against defects, a 30-day worry-free exchange & return and lifetime tech support. Visit TOPENS website for the user manual, installation video, and personalized service. TOPENS is ready to offer professional solutions for any questions or assistance. Enjoy an easier and smarter life by ordering other TOPENS accessories.


Description

HLR01 HomeLink Remote Control Kit Works with All TOPENS Gate Openers

HLR01HLR01

TOPENS HLR01 HomeLink Receiver allows for seamless control of the gate opener through the built-in HomeLink system in the vehicle. Simply press the HomeLink button to enjoy instant access to your property.

HLR01HLR01

Why Choose TOPENS?

Founded in 1998, TOPENS is one of the Americas well-known and trusted consumer brands in gate automation industry.

TOPENS is always committed to providing the high-quality products as well as the most helpful service. When you have our products, you also get the favorable 12-month war-ranty, life-time tech guidance, and free system consultant service.

We have a knowledgeable, talented team of technicians to assist you with all of your questions and troubleshooting.

Steps to Complete the Setup

HLR01HLR01

Terminals Introduction

The receiver can be wired to the gate opener system via PORT 1 or PORT 2. Remote control button A is used to control PORT 1, while button B is used to control PORT 2.

HLR01 can be powered by the control board of the gate opener or by the external 12-24VDC power source.

HLR01HLR01

HomeLink Pairing

1. Press and hold the HomeLink button for about 20 seconds until it entering programming mode.

2. Continue to hold the HomeLink button, and place the remote 2~5 inches away from HomeLink.

3. Press and hold the button on the remote.

4. Keep both buttons held until the programming is successful.

TOPENS HLR01 HomeLink Remote Control Kit - Highlights

HLR01HLR01

About Signal

To extend the control range, it is recommended to stretch the antenna out fully or replace the original one with a new antenna.

HLR01HLR01

HomeLink Receiver

2.2 x 3 x 1" (55 x 75 x 25 mm)

The receiver only works with the gate / garage door openers, and does not support other door access control systems.

HLR01HLR01

Remote Control

1.1 x 2.4 x 0.4" (27 x 60 x 10 mm)

Battery of the Remote Control: 2 x 3V Lithium Cell CR2016 Battery (Incl.)

HLR01HLR01

Help

Choose TOPENS accessory, visit our website to download the user manual, watch the installation video and enjoy consultant service directly.

What Is the Specification of the HLR01?

●Operating Current: Max. 70mA ●Modulation Mode: ASK (AM)

●Output: Relay SPDT ●Modulation Mode: ASK (AM) ●Frequency: 315MHz

●Battery of the Remote Control: 2 x 3V Lithium Cell CR2016 Battery (Incl.)

How to Ensure Clear Signal Transmission?

For clear signal transmission, please do not put the HLR01 in a metal box.

It is NOT suggested to use the HomeLink receiver at signal towers, electrical substations and confined spaces.

Some buildings or obstructions may affect the control range.

Do I Need to Add Solar Panels if the Gate Operator System Is Only Solar Powered?

Yes ! Please add 30W solar panels or more and upgrade the battery capacity (NOT incl.) to at least 17 Ah or higher to meet the power consumption.

What Type of Wire Do I Need to Connect?

4C x 22AWG cable for connecting the receiver with the gate opener system. The distance between the receiver and the control board should be less than 50 feet (15m).

Whats in the Box?

1 x HomeLink Receiver

1 x Remote Control Transmitter with Batteries

1 x TOPENS User Manual

Product guides and documents

User Manual (PDF)