Feature

●Pinion Gear: Model: 0.5 Mod; Teeth: 25T; Bore Size (Shaft Dia.): 5mm / 0.2"; Outer Dia. (Teeth Part): 13.5mm / 0.53"; Effective Teeth Length: 5mm / 0.2"; Step Size: 10mm x 5mm / 0.39" x 0.2" (D*H)
●45# Carbon Steel: Made of 45# carbon steel, the pinion gear has better hardness, higher strength and resistance to deformation than ordinary A3 steel.
●Surface Treatment: Frequency hardened parts have higher wear resistance, higher strength and lower notch sensitivity. Blackened surface can effectively prevent rust and oxidation.
●Easy to Use: Be sure your RC motor shaft have the same diameter. Comes with set screws for each pinion gear, easy to install. Hardness of teeth surface: hard teeth surface.
●Tips: Release the motor to install the pinion. Make sure to lock it on the flat part of the motor shaft. Good pinion gear replacement for your equipment.


Description

11
11
45# Carbon Steel

The pinion gear has better hardness, higher strength and resistance to deformation than ordinary A3 steel.

Frequency Hardened

Frequency hardened parts have higher wear resistance, higher strength and lower notch sensitivity.

Special Coating

Blackened surface can effectively prevent rust and oxidation. Comes with set screws for each pinion gear, easy to install.

Tips

  • Be sure your RC motor shaft have the same diameter. Release the motor to install the pinion.
  • Make sure to lock it on the flat part of the motor shaft.
  • Good pinion gear replacement for your equipment.