Detailed Iinstallation Guide
Note: PLEASE do not get overwhelmed by the number of parts. Just unload all the parts and categorize them.
The one with the largest number of screws is the M5 Screw (Part 7), which has a total of 15 PCS screws.
In addition, there are 4 other models of screws (Part 9 & 10), each model with 4 pcs.
Step 1: Use the mounting plate (Part 2) with the expansion screws to mark a position where you want to install the projector.
Step 2: Use the M5 screws to screw the mounting plate to the extension arm (Part 3). The extension arm is expandable, you can adjust it to the proper length by loosening the screw on it.
Step 3: Insert the Pan & Tilt (Part 1) the swivel into the bracket and fixed them with M5 screws, tighten all the screws with your screwdriver.
Step 4: Use the M5 screws to connect the extension arm to the bracket, align the holes, fix them with the M5 screws, and then tighten them with your screwdriver.
Step 5: Connect the finished bracket (Part 4) to the projector. Need to use (Part 9 & 10) screws, different models of screws are suitable for different projectors, please select the corresponding model of screws according to your own projector hole.
If the bracket doesnt fit the holes, you can use the 2 small plates to do the trick. (Lose the nuts on the long plates and took them out, use the M4 screw to fix the small plate according to the holes on the projector. Insert the small plate into the bracket, and screw the nuts a little bit). Adjust the angle of the bracket as needed, then insert another two screws into the projector. Tighten all the screws with your screwdriver, and then tighten the nuts.
PS: Before fix the projector on the ceiling or wall, please take it with the mount to the ceiling or the wall, then power on the projector to check the best projection position. After selecting your ideal position, mark the holes with a pencil, then drill four holes in the ceiling or the wall based on the marks, and fix the projector with the expansion bolts.
Step 6: Finally, fix the mounting plate with the expansion bolts.