How To Use The Stripping Tool
1.Push the cassette out of the housing, push from the front of the cassette.
2.Cassette is reversible, one side is available for RG-59/6 and another side is for RG-7/11.
3.For stripping coaxial cable:
a.Insert the cable until it aligns with the cable guide.
b.Insert your index finger into the strippers finger ring, rotate the stripper by counter clockwise 3-5 times. The cable insulation is cut while you are turning the stripper.
c.Open the jaws and remove the cable. Pull away the outer jacket and dielectric to expose the inner conductor.
d.Stripping distance is designed for 6mm, for each dielectric and inner conduct.
4.For stripping round networking cable:
a. Insert the cable into the second stripping hole, rotate 1-3 times at counter clockwise, and then open the jaw and remove the outer jacket.