Feature(may vary by option.)
●★ 【Safe Professional Engine Timing Light】★Made of impact resistant ABS housing, reverse polarity protected and over load protection, accurate up to 10000rpm.
●★ 【Widely Use】★Design to re-timing your car`s ignition to get the best performance that you can. This strobe timing light is suitable for car, agricultural, marine engines and all gasoline engines of two strokes or four strokes, easily operate on 12V ignition systems.
●★ 【Powerful Function】★The inductive timing light is able to detect the automotive knock suppression control system and vacuum advance angle control system, change its advance angle with the speed change
●★ 【Decreasing Cylinder Pressure】★The ignition timing light is able to reset the ignition timing under the normal wear of the engine for a long time, the regular replacement of timing belt and belt pulley, the decrease of cylinder pressure.
●★ 【Sensor Clips】★The sensor clip is red and black to distinguish positive and negative poles, easy to use and more secure. And the color of the wire is also different to prevent the glue sleeve of the clip to come off and difficult to distinguish
[Black]
Description
PLEASE NOTE: before adjusting the timing, the "dwell angle" or "gap" should be adjusted on vehicles fitted with contact breaker points.
Operating Instructions:
1.Clamp the inductive pick-up around the number one (1) spark plug wire. Make sure the arrow on it is facing towards the spark plug.
Do not allow the inductive pick-up to touch the exhaust manifold or surrounding parts as these areas become extremely hot and will damage the inductive pick-up.
2.Connect the RED clamp to the positive (+) battery terminal.
3.Connect the BLACK clamp to a secure engine ground such as the alternator bracket or the engine block. For safety reasons, do not use the negative (-) battery terminal or fuel system components as a ground connection point.
Specification:
Type: Engine Timing Light Tool
Material: ABS
Input voltage: 12V
Trigger point: high volt coil of No.1 spark plug
Speed: up to 10000rpm
Working temperature: 0-40℃
Speed: 200-10000r/min
Size: 18.0*12.0*5.0cm/7.1*4.7*2.0in (L*W*H)
Net Weight: 460.0g/16.23oz
Package :
1 * Ignition Timing Light