Feature

●Package: 2 Packs of 36" 750mv thermopile, replace part number Q313A QV32 QV32B-A QV32-A QV32B QV36-A QV36B-A QV36QV36D QV36D-A QV36DB QV36DB-A QVI25 QVI30 QVI-30FB QVI35 QVI-25FB QV Pier Heat N Glo Gas Stoves: AT-Grand (Also fits the B, C and D models).
●Specifications: Length 36"(914.4mm) glass fiber wrapping line, metal aluminum envelope, these two lines are high temperature resistance fire line. Connecting type: spiral type and two-pole plug-in type. The fireplace thermopile is applicable to most water heaters, ovens, gas fireplaces furnaces and stoves．
●Compatible: Fit for Empire DV210, DV215, GWT25. GWT35 Q313A1188 1950-001 1950-53B 8073485 E31-12 pilot burner, G01A-332 G01A-512 millivolt power generator thermopile, Replacement part number: Replace 60125501, 60J79, 60J7901, H5882, R942, R1054, 2103-512, 1950-001, 071515, 53374, 7533113 Replacement of Heatilator Heat n Glo 36" Lead Thermopile, and GWT50 Models Replacement of PITCO 60125501
●BasysionThermopile Generators It will needs about 60 seconds (2 minutes ) to heat up to the 750mV and the flame should be heat the middle of the head sensor, The resistors are different due to different gauges and lengths.the voltage is lower than 750mv, Between 1500 mΩ~4500 mΩ, the output power is 750 mA. The normal working temperature is 700-750℃,it should be heated to at least 700C,so as to gradually increase to the working voltage.
●The thermoelectric stack has been tested and made of brand new materials, high-quality copper material, with a long service life. Quickly and conveniently installed on propane tanks and gas cylinders without the need for tools.


Description

Product Specification:
Lengths: 36 inches
Connecting type: spiral type and two-pole plug-in type
Working temperature:700-750°C
750mv Thermocouples have long been used in self-powered heaters and hot water equipment. Suitable for propane gas appliances like fireplaces, hot water heater, fryer.It has been proven in millions of appliances as the contractors preferred thermopile and are found in many of todays gas fireplaces.Because of High Resistance inside, The thermopile need around 1-2 minutes to be heated and increase to at least 750mV ,Do not take it off untill you heated it around 2 minutes,Do not bend the fireplace thermopile too hard on the crimped part and inside wires or it may cause short circuit and low voltage problem.
36 inches The Thermocouple is suitable for the following models product. You can take it for reference.
60125501,h5882,60J79,60J7901,R9422103-512,QV32 QV32-A QV32B QV32B-A (Pre Serial # 0021080519). QV36 QV36-A QV36B-A (Pre Serial # 0021076968). QV36D QV36D-A QV36DB QV36DB-A QVI25 QVI30 QVI35 QVI-25FB QVI-30FB QV Pier Heat N Glo Gas Stoves: AT-Grand (Also fits the B, C and D models).AT-Insert AT-Supreme (Also fits the B, C and D models).