Feature(may vary by option.)

●【23HS2430B Motor Parameter】Phase: 2 Phase; Step Angle: 1.8 degree; Frame Size: 57 x 57 x 112 mm; Shaft Diameter: 8mm; Holding Torque: 2.8Nm (425oz.in); Phase Resistance: 1.6ohms; Rated Current/phase: 3A; Inductance: 6.8mH+/-20%(1KHz).
●【Excellent Performance】It has high torque, the stepper motors power is 15%-20% higher than conventional motors. The circuit board inside the bipolar motor has been updated to ensure the stability of the motor structure and achieve the best uniform rotation.
●【Advanced Technology】The motor coils are made of pure copper enamelled coils, built by advanced winding technology, with evenly distributed copper wires, not easy to get hot or burn, lower temperature rise of the motor, no deformation and noise for a long time.
●【High Torque 】High quality motor steel, low self-induced reactance in the bearings, good responsiveness, direct linkage to the load at low speeds at near blocked speeds, without gear reduction.
●【Low Noise 】The stepper motor is housed in a high strength metal casing, which is robust and durable, with frosted metal side walls for increased friction.

[3PCS 3]





Description

nema23 stepper motornema23 stepper motor

Advantages:

Higher torque Low self-induced reactance

  • High-quality motor discs, low inductive reactance of bearings, good responsiveness, and can be directly connected to the load at low speeds without gear reduction in a nearly blocked state.

Precision Manufacturing

  • Stainless steel shaft, high silicon steel plate, aluminium alloy front and rear end caps, copper enameled wire and other high-end materials and accessories to protect the quality of the product.

Low heat generation and high efficiency

  • Adjust the current size according to the actual situation, and send out more energy in a compact space.

High precision and low noise

  • Adopting silicone rotor, the motor has high torque and stable output, so it has low noise and longer life.

stepper motorstepper motor

Pure copper enamelled coils & Silicone rotor

  • Advanced winding over wire process to create a uniform copper wire row, lower temperature rise of the motor, long-time operation will not appear deformation and noise.
  • Advanced manufacturing technology to prevent oxidation of silicon steel to reduce the surface burrs after grinding, the motor torque force is large, can reach 2.8Nm (425oz.in).

electric motorelectric motor

dc motordc motor

stepper motor driverstepper motor driver

Aluminium alloy die-cast end caps & Rigid performance silicon steel sheet

  • Aluminium die-casting end caps With higher strength, better precision and more favourable to the heat dissipation of the motor.
  • Rigid performance silicon steel sheet. The excellent stator stack design is the motor with more sawing force, higher precision and lower loss.

304 stainless steel shaft

The motor shaft diameter is 8mm, length is 21mm, is made of 304 stainless steel shaft, high strength, not easy to wear and rust.

How to wiring the 4-lead wire

  • Stepper motors Red wire connects to drivers A+ port
  • Stepper motors GREEN wire connects to drivers A- port
  • Stepper motors YELLOW wire connect to drivers B+ port
  • Stepper motors BLUE wire connect to drivers B- port
57 stepper motor driver controller57 stepper motor driver controller

Parameters:

  • Model: 23HS2430B
  • Shaft: Dual shaft, diameter is 8mm
  • Phase: 2 Phase
  • Step angle: 1.8°±5%
  • Motor Size: 57*57*112mm
  • Voltage: 4.8V
  • Rated current: 3A/phase
  • Holding torque: 2.8Nm (425oz.in)
  • Resistance:1.6Ω±10%/phase
  • Inductance: 6.8mH±20%/phase
  • Detent torque: 12N.cm/max
  • Rotor inertia: 800g.cm²
  • Insulation: B
  • Inductance: 3.5mH+/-20%(1KHz)

cnc machinecnc machine

Wide range of applications

  • Stable operation, suitable for a variety of automation equipment and instruments, 3D printers, textile industry, printing equipment, CNC machine tools, medical equipment and so on.

General Specification:

  • Step angle accuracy: ± 5%(full step,not load) Resistance accuracy: ± 10% Inductance accuracy: ± 20% Temperature rise: 80deg Max(rated current,2 phase on) Ambient temperature: 20deg-50deg

23HS6403 Stepper Motor 23HS9430 Stepper Motor 23HS8430 Stepper Motor 23HS8430 Stepper Motor 23HS2430 Stepper Motor 23HS8430 Stepper Motor
23HS6403 Stepper Motor 23HS9403 Stepper Motor 23HS8430 Stepper Motor 23HS8430B Stepper Motor 23HS2430 Stepper Motor 23HS2430B Stepper Motor
Customer Reviews
—
—
—
—
—
5.0 out of 5 stars
1
Price $38.00 $49.00 $89.03 $91.74 $91.00 $95.00
Model 23HS6403 23HS9430 23HS8430 23HS8430B 23HS2430 23HS2430B
Shaft Single shaft/diameter is 6.35mm/length is 21mm Single shaft/diameter is 8mm/length is 21mm Single shaft/diameter is 8mm/length is 21mm Dual shaft/diameter is 8mm/length is 21mm Single shaft/diameter is 8mm/length is 21mm Dual shaft/diameter is 8mm/length is 21mm
Phase 2 phase 2 phase 2 phase 2 phase 2 phase 2 phase
Step angle 1.8°±5% 1.8°±5% 1.8°±5% 1.8°±5% 1.8°±5% 1.8°±5%
Motor size 56*56*56mm 56*56*81mm 57*57*76mm 57*57*76mm 57*57*112mm 57*57*112mm
Rated current 2.5A 3.0A 3.0A 3.0A 3.0A 3.0A
Holding torque 1.1Nm(165oz-in) 2.1Nm (308oz-in) 1.8Nm(270oz-in) 1.8Nm(270oz-in) 2.8Nm (425oz.in) 2.8Nm (425oz.in)
Phase resistance 0.8Ω 0.75Ω 1.6Ω 1.6Ω 1.6Ω 1.6Ω
Phase Inductance 4mH±20% 4mH±20% 6.8mH±20% 6.8mH±20% 6.8mH±20% 6.8mH±20%
DM556 Stepper Motor Driver DMA860S Stepper Motor Driver NV5160T4 Stepper Motor Driver LAN5160T4 Mach3 Stepper Motor Driver CM300 CNC Motion Controller CM400 CNC Motion Controller
DM556 Stepper Motor Driver DMA860S Stepper Motor Driver NV5160T4 Stepper Motor Driver LAN5160T4 Mach3 Stepper Motor Driver CM300 CNC Motion Controller CM400 CNC Motion Controller
Customer Reviews
—
5.0 out of 5 stars
2
—
—
—
—
Price $24.79 $29.00 $97.00 $137.00 $240.00 $288.29
Axis Single Axis Single Axis 4 Axis 4 Axis 3 Axis 4 Axis
Maximum pulse 500KHz 300KHz 1MHz 300KHz 1MHz 1MHz
Highest division 200~51200 128 256 256 ✓ ✓
Current 6A 8.2A 6A 6A ✓ ✓
Voltage 20-50V DC 24V DC 20-50V DC 18V—160V DC/18V—110V AC 24V DC 24V DC