Feature(may vary by option.)

●🌞【BTT TMC2209 V1.3 5PCS】Package comes with 5 pieces BIGTREETECH TMC2209 stepper motor drivers and heatsinks. Continuous current of TMC2209 V1.3 reach up to 2.0A (peak 2.8A). Its voltage ranges from 5.5V to 28V and the microstepping capability can go up to 1/256, providing precise control over the stepper motors movement. BTT TMC2209 V1.3 supports UART, STEP/ DIR Mode.
●🌞【Ultra-silent Stepper Motor Driver】BIGTREETECH TMC2209 V1.3 adopts stealthChop2 Mute technology to reduce motor noise to the point of silence, ensuring noiseless operation, maximum efficiency and best motor torque. BTT TMC2209 V1.3 offers you the most cost-effective choise to upgrade your stepper drivers from non-silent TMC2100 / A4988 / DRV8825 / LV8729.
●🌞【No Losing Steps】The Spreadcycle provides high-precision cycle-by-cycle current control for dynamic motion. And StallGuard4 technology provides sensorless homing and load detection to prevent potential abnormal motor rotation such as skipped steps. Therefore BTT TMC2209 V1.3 stepper motor drivers help to print smoothly and accurately without losing steps and rough print.
●🌞【Excellent Heat Dissipation】With a larger area fan thermal pad, BTT TMC2209 V1.3 stepper motor driver generates lower heat, it can lower 30% heat than others stepper motor drivers even keep working for a long time. With Passive cooling on a 10 hours print, they only hit 37°C.
●🌞【Wide compatibility】BIGTREETECH TMC2209 motor driver is compatible with most 3d printer motherboards in the markrt like BTT SKR 2, SKR 3, SKR 3 EZ, OctopusV1.1, Octopus Pro, SKR V1.4 Turbo, Manta M4P, Manta M5P, Manta M8P, GEN L V2.0, Anycubic I3 Mega and other mainboards. We offer all our customers 1 year warranty of tmc2209. Please feel free to contact us for help if you might have any problem during using.

[TMC2130 SPI]




[TMC2209 UART]




[TMC5160T 4PCS]




[TMC2208-STEP  & DIR]




[TMC2240 SPI]





Description

tmc2209tmc2209

BIGTREETECH TMC2209 V1.3 is an ultra-silent motor driver IC for two-phase stepper motors, its drive current is 2A and peak current is 2.8A. Compared with TMC2208, the driving current of this IC is not only improved by 0.6a-0.8a, but also this IC increases the function of locked-motor test.

btt tmc2209 v1.3btt tmc2209 v1.3
low noicelow noice

Ultra-Silent

BTT TMC2209 stepper motor driver adopts stealthChop2 Mute technology. You wont feel any noice even when you are sleeping.

low heatlow heat

Low Heat

BIGTREETECH TMC2209 V1.3 stepper motor drivers gurantee low heat generation and has a larger area for cooling conduct.

no losing stepsno losing steps

No Losing Steps

With Spreadcycle and StallGuard4 technology, BTT TMC2209 stepper motor drivers is not easy to lose step, ensuring a quality print.

sizesize

Parameters of TMC2209

Product size: 15.24mm*20.32mm

Power voltage（VM): 4.75V---29V DC

Max microstep：256

How to Make Sure the Drives is not Short-Circuit

How to Make Sure the Drives is not Short-Circuit How to Make Sure the Drives is not Short-Circuit

A shorted driver is installed on the motherboard and may cause the burning of the motherboard. Please make sure that drives you received are not short-circuited.

  1. Turn the multimeter to the buzzer position, connect the positive test lead to VM, and the negative test lead to GND to check if there is a short circuit, and next use the same way to test if there is a short circuit between VCC and GND. Then make sure there is no short circuit before plugging into the motherboard.
  2. Second, When inserting drivers on the main board, please figure out the direction is right, pay attention that the EN pin of the driver corresponds to the EN pin of the main board.
  3. Before turning on powering, first check if there is a short circuit between 24V and GND, +5V and GND, and 3.3V and GND.
  4. If everything is going well then connect power with your printer and enjoy your printing.

Interface STEP/DIR
Configuaration CFG Pins or UART
Native Microsteps 2 Up to 1/256
microPlyer Microsteps 1/256
Logic Supply Voltage(VIO) 3-5 V
Motor Supply Voltage(VM) 5.5-28 V
Phase Current Max(RMS) 3 2.0A (peak 2.8A)
RDSon 0.2Ohm
Rsense 110mOhm
coolStep Yes
stallGuard Yes