Feature

●10M high-speed optocoupler is used to isolate the input , effectively preventing the interference of the driver board to the control board, making the system more stable and reliable.
●Ideal for robot competitions, car competitions, etc.
●The basic components of the drive module body are patches, which has a high degree of integration
●Well-designed layout, beautiful and small size, onboard two high-power DC motor drives
●The large heat sink can effectively dissipate the drive module under high current and maintain the good stability of the module


Description

Feature:

1. 10M high-speed optocoupler is used to isolate the input , effectively preventing the interference of the driver board to the control board, making the system more stable and reliable.
2. Ideal for robot competitions, car competitions, etc.
3. The basic components of the drive module body are patches, which has a high degree of integration
4. Well-designed layout, beautiful and small size, onboard two high-power DC motor drives
5. The large heat sink can effectively dissipate the drive module under high current and maintain the good stability of the module
6. When driving the motor, the maximum rated current of the module can reach 60A, and the on-resistance is only 0.003 ohm
7. High switching frequency, up to 60KHZ

Specification:

Item Type: DC Motor Driver Module
The control interface is very simple: when A1.A2 = 0.0 is the brake; when A1.A2 = 1.0 is the forward rotation; when A1.A2 = 0.1 is the reverse rotation; PA is the PWM input (motor speed adjustment); G is for the control board Common ground pin (channel B is controlled in the same way)
Both 3.3V and 5V microcontrollers can control this module, and only need one motor power (12V ~ 30V)

Package List:

1 x Module