Feature

●TECHNICAL PARAMETERS: Detection range from 0%~4%, error is ±0.3%, detection type contain DOT3, DOT4, DOT5.1
●MOISTURE CHANGE MEASUREMENT: The brake fluid tester pen is based on the change of electrical conductivity to measure the moisture change of brake fluid
●QUICK DISTINGUISH: The water content is 0%‑4% representing no water and the amount of water content in turn, so that car owners can quickly understand whether the water content of the brake fluid is qualified.
●SCRATCH RESISTANT ABS: Brake fluid liquid tester, using excellent ABS material, possess impact resistance, scratch resistance, environmentally friendly
●ACCURATE AND RELIABLE: Original high accuracy probe is made of excellent materials, to ensure outstanding performance


Description

Brake Fluid Liquid TesterBrake Fluid Liquid Tester

Brake Fluid Liquid TesterBrake Fluid Liquid Tester

Brake Fluid Liquid TesterBrake Fluid Liquid Tester

Brake Fluid Liquid TesterBrake Fluid Liquid Tester

High Precision Metal Probe

Original high accuracy probe is made of excellent materials, to ensure outstanding performance

Knob Type Battery Cover

Original high accuracy probe is made of excellent materials, to ensure outstanding performance

Fallproof and Waterproof

Using excellent ABS material, possess impact resistance, scratch resistance.

Brake Fluid Liquid TesterBrake Fluid Liquid Tester
11

Brake Fluid Liquid Tester Pen

Specification

Model: HT662

Material: ABS

Battery: 2 x 1.5V AAA battery(not include)

Basic Parameters:

Detection Range: 0%~4%

Error: ±0.3%

Detection Type:

DOT3, DOT4, DOT5.1

Package List

  • 1 x Brake Fluid Liquid Tester
  • 1 x User Manual

On or Off:

Press the power button and hold for more than 1s to turn on, the beep will beep once, the display will light up, and will enter the test state; in the power on state, press the power button to shut down.

Function Switch:

The default brake fluid type detected by the detection pen is DOT3; Press the function swtich button to switch to DOT4; Press again to switch to DOT5.1; Press again to return to DOT3, and so on.

Moisture Detection:

After power on, select the type of brake fluid to be tested. Before testing, make sure the metal probe is clean, immerse the matal part of the testing head in the liquid to be tested for 3 seconds, wait for the display to stabilize, observe the state, and read the valve. When the valve is 0-2%, the green backlight is bright, indicating that the brake oil can still be used; 2-3%, the bright yellow backlight, the buzzer sounds slowly, indicating that the brake oil needs to be replaced; more than 3#, the bright red backlight, the buzzer quick sound, please change the brake fluid immediately.