[Length:10cm(10pcs)]
Diameter: 0.5mm
Length:
10cm (10 pieces)
50cm (10 pieces)
Our steel wire is used to do the raw material of the spring, it is impossible to bend a large amplitude will become exactly the same state with the bending before, there will be a slight deformation, even if the finished product of the spring, if the external force is large enough, it will also occur deformation.
hrc:90
Tensile strength: 2.0mm is 1600 MPa, the smaller the diameter, the greater the tensile strength, the better the elasticity.
Yield strength:780Pma
Elongation:41A% (tensile strength is the value needed to pull off the wire, with the diameter and the force value of the conversion formula between the tensile strength of the data can be derived, yield strength refers to the ability to resist deformation)
Notes:
1. Due to the accidental inaccuracy of manual measurement, please allow a small error in size.
2. Due to the different brightness and colour of different computer screens, the colour of the received item may be slightly different from the colour shown in the photo.