Feature(may vary by option.)
●[Versatile Fit] Our transmission cooler is designed to accommodate a wide range of vehicles with 5/16” internal diameter transmission cooling lines. Ensure proper clearance for setup of the transmission oil cooler.
●[Enhanced Cooler] This robust trans cooler is comprised of durable aluminum alloy; its dimensions are 15.66” in length by 7.5” in width by 0.75” in depth, ideal for efficient cooling.
●[Superior Hose Quality] The hoses for our transmission cooler are fabricated from the durable CPE material; they tolerate working pressures up to 145psi and maximum pressures of 900psi, all while withstanding extreme temperatures from -40℉ to 257℉.
●[Efficient Heat Dissipation] The transmission oil cooler incorporates fins that effectively draw heat away from the ATF (Automatic Transmission Fluid), promoting optimal airflow to reduce the fluid temperature as it cycles through the system.
●Customer Satisfaction Guarantee: This product comes with a 30-day money-back guarantee and a 1-year warranty. Customers can refund or replace their purchase without worrying about any return fees. Customer service is available to answer any questions within 24 working hours.
[Transmission cooler-6 Pass]
[Transmission cooler-4 Pass]
Description
Direct support from the factory
Why is DriveMedley worthy of trust?
At DriveMedley, we empower your journey with premium aftermarket parts. "Transform your drive, command your life" isnt just a slogan; its our promise. With direct factory support, we ensure trust and quality for a ride thats truly yours. Trust in us, steer with confidence.
TYPES OF INSTALLATION CONNECTION
IN-SERIES INSTALLATION
The recommended cooler connection is the “in-series” INSTALLATION. It utilizes the existing cooling system and complies with most new car warranties. This method provides maximum cooling by returning the coolest oil directly to the transmission
REPLACEMENT INSTALLATION
This method should be used if the existing cooling system is damaged and repair costs are excessive. The replacement installation may void new car warranties and will provide less total cooling than the “in-series” installation. This application requires an oil cooler one or two sizes larger
RETURN OIL LINE IDENTIFICATION
- Start engine while engine is cold.
- Depress brake pedal, place transmission in drive for no more than 10 seconds
- Stop engine
- Identify oil return line by feeling both oil lines (3&4). Coolest line is oil return line
-
COOLER INSTALLATION
COOLER INSTALLATION STEP 1&2
- Place clamps on ends of hose and push hose onto oil cooler fitting. Using a couple of drops of trans fluid, lubricate the fittings. Leave hose in loop- DO NOT CUT THE HOSE.
- Position clamps 1/4- 3/8 inch from end of hose. Tighten clamps until rubber protrudes level with clamp slots. DO NOT over tighten clamps
-
COOLER INSTALLATION
COOLER INSTALLATION STEP 3&4
- If mounting oil cooler behind radiator position #3 , loosen fan shroud. Cut or drill hole in fan shroud for hose clearance.
- Remove adhesive backing from foam pads, attach pads to oil cooler.
-
COOLER INSTALLATION
COOLER INSTALLATION STEP 5&6
- Position oil cooler in desired mounting location with pads facing radiator or air conditioning condenser . Insert rods through cooler and pads, radiator and/or condenser.
- Install locking buttons. These are permanent and can only be removed by cutting. Tighten to compress the foam pad. Cut off excess mounting rods.
- Check the installation after a week to check or tighten the mounting rods and for any leaks
-
TRANSMISSION COOLER MOUNTING POSITIONS
Transmission Cooler Location
- When selecting the best location for your vehicle, always consider a location that will deliver the maximum airflow.
- The Transmission Cooler can be mounted in multiple locations on your vehicle. Reference Diagram # 2 for possible cooler positions. #1 is the ideal location, #2 is second best and #4 being the last choice.
