Feature

●【PONDFORSE Air Pump】PONDFORSE air pump works only 20 watts needed, offering 30L of air per minutes,voltage 120V 60Hz, able to run for multiple air stones and sponge filters
●【Mute Pump】The air pump is driven by magnetic bearings. With thickened plastic cover, sealed locks the sound from motor .It is so quiet without loud hum that you have to put your head up close to it and could barely hear it
●【Adjustable Airflow】The airflow can be adjusted by rotating the control knob according to your preference, suitable for multiple tanks. The air pump is powerful, connecting with the air stone, pumping out incredible output
●【Wide Range of Application】Designed to satisfy the requirements of a multitude of water related applications. Perfect for multiple aquarium, fish tanks, oxygenating hydroponic system
●【Energy-Efficient】Featuring of durability and reliability, adopting innovative electronics, outperform in volume and energy saving,consuming less than half the energy of the same capacity pump


Description

AIR PUMPAIR PUMP

PONDFORSE Ultra-quiet Air Pump for Aquariums, Fish Tanks, Hydroponics

  • 4 outlets
  • With sealed outer housing, 4 rubber feet and suspended motor to reduce vibration and noises
  • Airflow is adjustable by rotating the external controller
  • Powerful with low power consumption
  • One 4 hole divider manifold, one 8mm diameter and two filter sponge come with the pump

AIR PUMPAIR PUMP

AIR PUMPAIR PUMP

AIR PUMPAIR PUMP

Ultra-silent Motor:

  • With sealing plastic outer cover, the sound from inner motor can be locked
  • The magnetic bearing contributes to sound insulation and vibration reduction

Adjustable Airflow:

  • The airflow is adjusted by rotating the control knob, suitable for variable application in different places
  • The pump produces smooth and steady airflow, pumping out incredible output

Multiple Outlets:

  • 4 outlets are available for running several multiple air stones at one time
  • Suitable for multiple aquarium, fish tanks, oxygenating hydroponic system
AIR PUMPAIR PUMP

How to operate?

  1. Install the pump in fixed position
  2. Cut the tubing according to the measured length
  3. Connect tubing to the pump
  4. Install check valve to the tubing
  5. Connect tubing to the air stones
  6. Control the volume of air

Note:

  • Put the air pump higher than the water level
  • If the pump is lower than the water level, it is necessary to install check valve to prevent water backflow
  • Do not put the air pump into water, the pump is only for external use

Product information