Feature
●🚖【WIDE RANGE of APPLICATIONS】: Fuel Leak Detector supports DC 12V car batteries. For detecting the leakage of pipe systems on cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks, and speedboats boats. Suitable for all car models.
●🚖【OPERATION SAFTY】: The Smoke Leak Detector owns high temperature protection and hold -limit pressure. During operation, if the equipment senses the temp. above 75°C, the power supply will be automatically power off. If the air pressure exceeds the Standard mode (35psi) /EVAP mode (10psi), the air pump will stop working. This effectively ensures the safety of operators and equipment.
●🚖【ADVANCED TECHNOLOGY】: EVAP Smoke Leak Tester works on the EVAP system (we also have another version that specially designed for EVAP system).
●🚖【POWERFUL AND EASY TO OPERATE】: Smoke Leak detector has its own Air Pump without relying on other machines and Pressure Gauge with precise scales. Simply connect the detector with the DC12V battery, it can output thick smoke within 30s after turning on.
●🚖【LARGE AMOUNT OF SMOKE】: EVAP Smoke Machine has its own air pump,so it does not have to rely on other air machines.Connect the detector with DC12V battery,it can output lots of smoke within 30 seconds after turning on.
●🚖【3-YEAR WARRANTY】: For damages caused by non-human factors, we promise to resend parts for free within 3 years. For any needs, you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours.
Description
- SDT106 Car Smoke Leak Detector is designed for detecting the leakage of pipe systems on cars, motorcycles, such as fuel pipe, air intake system and cooling tank.SDT-106 Fuel leak detector is for all pipe systems EVAP is a fuel evaporation control system used to collect and deal with fuel vapor, to prevent fuel vapor leakage. If the leak will pollute the atmosphere and even cause the vehicle to spontaneous combustion.Plus this set of accessories can detect the smoke of the EVAP system, check whether there is leakage, broken, enhanced traffic safety.
List of Accessories SDT106 Smoke Leak Detector Locator
- Standard Cone Adapter: φ30-85mm, used to seal the airintake ports & introduce smokeinto the exhaust system.
- Power Cord Clamp: The cable length is 1.5m with 10A rated current. used to connectthe device to the battery powersupply.
- Valve Core Wrench: The double heads measure φ4mm/6mm with an overall length of 122mm & used as a tool to removeand install the EVAP service portvalve core.
- Hook: Used for hanging products.
- EVAP Special Connector: φ12.7mm, connects to the cars EVAP access port. which then introduces smoke.
- Test Oil Refill Bottle: The capacity is 100ml & usedfor adding smoke test oil.
- Rubber Connector Parts: The bigger side is φ16/10mmand smaller one is φ4/3mm.used to conetct the hose mouth to a smaller interface.
- Smoke Hose: Length is 1.5m, oil-resistanthose with φ6x9mm taperedcouplings, for conducting air & smoke.
- Hard Rubber Hose Plug: Used for sealing the hose. (φ5/10mm, φ9/15mm, φ25/35mm, φ32/45mm, φ45/60mm, φ60/75mm.
ADVANCED TECHNOLOGY
- Car Sealing Test: Poor airtightness of the car may lead to inability to keep warm dusty, not soundproof, and not waterproof ,etc.
- Fuel Tank System Test: When there is a gap in the fuel tank and piping caused by improper installation, it will cause leaks in the fuel tank system.
- Exhaust System Test: When leaks happened in the exhaust, unpurified harmful gases to be discharged into the atmosphere and generate vehicle noise.
- Intake System Test: Leakage in the air intake system will lead to insufficient intake of the car engine.
- EVAP System Test: Leakage of the fuel evaporation system will cause fuel vapor to leak into the atmosphere, causing waste and pollution or unstable engine idling.
- Crankcase System Test: Excessive pressure or corrosion of the crankcase is the main reason to damage the seal of the crankcase and cause oil leakage.
- Various Pipe Fittings Test: Smoke testing of brake hoses, power steering hoses, cooling system hoses, air conditioning system hoses, turbocharger hoses, fuel hoses, intake and exhaust system hoses, etc. Note: Not applicable to air conditioning system piping.
|
|
|
|
|---|---|---|
Wide range of applications
|
Powerful and easy to operate
|
Advanced technology
|
|
|
|
|
|---|---|---|
Overheat & Anti-frost protection
|
Specifications
|
Packing List
|
How to do leakage test
- Step 1 Fill (baby oil or mineral oil based) smoke oil into the smoke machine. Note: The oil level shall not exceed the level gauge.
- Step 2 Disconnect the pipes that need to be conneced with detector.
- Step 3 Connect 12V vehicle power to start the device.
- Step 4 In about 30 seconds, the pipe will be filled with smoke. Check the leak points and use head lamp if necessary.
- Warming Tips
- In first time use, please fill with 10ml test liquid into the car smoke leak detector. Both liquid paraffin and baby oil are OK, the oil level shall not exceed the level gauge.
- Before filling fresh oil, please pour out the oil left in the detector. The fresh oil can be filled with only when the smoke gets thin, can’t be filled over 20ml each time.
- During the process of leak detection, must keep away from smoke-sensitive parts. Please be careful with the round part of the leak detector with high temperature to avoid burns hurt.
- With longtime high temperature work, the smoke and oil will oxidize and deteriorate. It will infect the service life of smoke generated part, so please change smoke and oil regularly.