Feature(may vary by option.)

●Drill use 0-400 RPMs Fit 1/8 (3mm) to 3/4 (19mm)
●Take the rough edge off of fresh-cut pipes, bolts, etc with ease. Helps make it easier for nuts and fittings to go on and produce an overall nicer finished product
●Outer works on -Round Stock -Bar Stock -Threaded Rod -Screws and more
●Inner Chamfer Tool Works On -Steel Pipe -Iron Pipe -Stainless Steel Pipe -Copper Tube -Aluminum Tube -Hard Plastic Tube
●Effective on -Stainless -Hardened Steel -Mild Steel -Copper -Brass -Wood -Fiberglass -Hard Plastic

[Deburring Drill Bit 3mm-19mm   &  Sliver]




[Deburring Chamfer & Countersink Bit Kit]




[Deburring Drill Bit 34mm-54mm]




[Deburring Drill Bit 3mm-19mm   &  Gold]




[Deburring Drill Bit 13mm-35mm]




[2PCS Deburring Chamfer Tool Set]




[Deburring Chamfer Tool Set]





Description

Products of ORX PLUS TOOLS are original design with multinational patents. Also, product quality is always our top priority.

11

ORX PLUS TOOLS DEBURRING CHAMFER TOOL BITS 3-19MM

  • Easy to work- Attaching the deburring external chamfer tool to the end of your power drill, Use the lowest speed on the drill bit, and then slightly applying pressure to remove the burr.
  • Cost-Effective- These deburring external chamfer tool can be used for repairing damaged bolt and tightening the nuts in place. You do not need to spend time and money to find hard-to-find or expensive replacement bolts.
  • Safety Design- Quickly repairs damaged bolts and tightens the nuts in place without hurting your hand, no sparks, and no burns; Simplifies the repair process.
  • Using proper speeds and feeds-Drill use 0-400 RPMs. Fit 1/8 (3mm) to 3/4 (19mm)
  • Widely Application-Effectively used in Stainless Steel, Hardened Steel, Mild Steel, Copper, Brass, Aluminum, Fiberglass, Wood, Plastic

HOW TO USE&STEPS

11

22

11

11

1. DRILL MODEL

Dont use impact/hammer driver. Please use drill driver to deburring/chamfering.

2.FIXED WORKPIECE

To make sure perfect deburring, please fix the workpiece tight.

3.SPRAY OIL

Hard steel could use lubricating oil to improve tool performance

4.DEBURRING/CHAMFERING

In a clockwise direction only. Slightly applying pressure to remove the burr.

OUTER REAMEROUTER REAMER

OUTER REAMEROUTER REAMER

DEBURRING CHAMFER TOOLDEBURRING CHAMFER TOOL

3MM-19MM

  • Quick chuck
  • 3 HSS blades
  • RPM: 0-400

15MM-36MM

  • Hex Shank
  • 5 Tungsten blades
  • RPM: 0-150

34MM-54MM

  • Hex Shank
  • 9 Tungsten blades
  • RPM: 0-150