Package Include:
1* 12V Receiver (with cover, if you need 24vdc, pls tell us)
1* Remote Control (with battery, If you need extra remote control , please tell us. )
parameter
Operating voltage: 12V
Maximum operating current: 10A
Working frequency: 433MHz
Encoding type: learning code
Housing size: 100mmⅹ80mmⅹ28mm
Control mode Description
Toggle (1 button on / same button off)
Latch (1 key on / other key off)
Momentary (Press and hold -> On; Release -> Off)
Set Control Mode
A. 1-8CH Toggle------ Press the transmitter button"1" to learn.
B. 1-8CH Momentary ----- Press the transmitter button "2" to learn.
C. Only 1CH Toggle, 2-8CH Momentary---- Press transmitter button "3" to learn
D. 1-8CH Latch--- Press the transmitter button "4" to learn.
E. 1-4CH Latch, 5-8CH Toggle---- Press transmitter button "5" to learn
F. 1-3CH Latch, 4-8CH Toggle---- Press transmitter button "6" to learn
G. 1-4CH Toggle, 5-8CH Latch---- Press transmitter button "7" to learn
H. 1-4CH Toggle, 5-8CH Momentary---- Press transmitter button "8" to learn
Description about the control mode
Momentary
----- Press the button 1, the receiver relay 1. is ON, release button 1; The receiver relay 1 is off, the same as 2/3/4/5/6/7/8. 8CH are independent.
Toggle
----Press the button 1 for 1 time, the receiver relay 1. is ON, press the button 1 again, the receiver relay 1 is switched off , the same 2/3/4 / 5/6/7/8. 8CH are independent.
latch
Press the button 1, the receiver relay1. is ON, the relays 2/3/4/5/6/7/8 are OFF.
etc. Press the transmitter button 4, the receiver relay4. is ON, the relays 1/2/3/5/6/7/8 are OFF
learning style
1. Press the learn button of the receiver until the LED indicator is on and then release the button. The receiver now remains in the LEARNING state.
2. Then you can press the appropriate button according to your requirements. When the indicator LED flashes 1 time
Delete the learned code
Press and hold the learn button of the receiver for 8 seconds until the LED indicator is off (Buzzer sounded for about three seconds)