Feature

●SKF self-aligning clutch release bearings are designed to control certain clutch conditions associated with the misalignment of driveline components. Evaluate the following problems that misalignment or off-centered wear of the conventional clutch release bearing can cause compared with the benefits of an SKF self-aligning clutch release bearing:
●SKF is the world leader in the design, development and manufacture of high performance rolling bearings, plain bearings, bearing units and housings.
●Based on a modular design approach, SKF’s clutch release bearing units comprise a precision ground sheet metal bearing unit and a polymer/steel sleeve or carrier . This design can be applied to push or pull clutch actuation with lever or concentric, hydraulic actuation . SKF has multiple designs available with inner or outer ring rotation for a variety of applications including motorsport and Formula 25
●Clutch release bearings from SKF are based on the design of an angular contact ball bearing . These bearings are made of stamped steel inner and outer rings with precision ground raceways, a polymer cage and either seals or shields and are pregreased at the factory with a high quality lubricant
●A clutch release bearing unit is used to engage and disengage the clutch via the diaphragm spring and pressure plate . Included in this compact design are provisions to guide the fork or piston radially


Description

Long Last Bearings for Extended Life

SKF Hub CapSKF Hub Cap
Decreasing maintenance & operating cost

SKF tapered roller bearings are proven to increase uptime.

The logarithmic profile of the rollers provides superior load distribution. The design of the flange/roller-end contact area reduces edge loading and promotes the formation of a lubricant film even under arduous operating conditions. The optimized finish of all contact surfaces maximizes the effectiveness of the lubricant. These features significantly decrease noise, temperature and vibration levels, and virtually eliminate temperature peaks.

SKF Tappered Roller BearingSKF Tappered Roller Bearing

Built to Last

Sealed SKF Roller Bearings


New small sealed SKF Explorer spherical roller bearings with improved performance are pre-lubricated with a specially formulated grease and sealed with highly effective contact seals. The seals retain lubricant in the bearing while resisting the ingress of contaminants that might otherwise cause premature bearing failure.

Thanks to their optimized materials and design, these bearings can deliver robust, reliable performance for the life of an elevator’s drive system.

Current Time 0:00
Duration 1:12
Loaded: 18.45%
Stream Type LIVE
Remaining Time 1:12
 
1x

SKF Self-Aligning Clutch Release Bearings are Built to the Highest Standard

SKF Bearings RollerSKF Bearings Roller