Feature

●[Part Number] 626-556 20765678
●[Fitment] for Saturn Outlook 2007-2009 3.6L V6-Gas (XE, XR),for Saturn Outlook 2010 3.6L V6-Gas (XE),for Chevrolet Traverse 2009-2016 3.6L V6-Gas (LS, LT, LTZ),for Chevrolet Traverse 2017 3.6L V6-Gas (LS, LT, for Premier),for Buick Enclave 2008-2011 3.6L V6-Gas (CX, CXL)
●for Buick Enclave 2012-2013 3.6L V6-Gas (Base),for Buick Enclave 2014-2017 3.6L V6-Gas (Convenience, Leather, Premium),for GMC Acadia 2007-2009 3.6L V6 - Gas (SLE, SLT),for GMC Acadia 2010 3.6L V6-Gas (SL, SLE, SLT),for GMC Acadia 2011-2013, 2016 3.6L V6-Gas (Denali, SL, SLE, SLT),for GMC Acadia 2014-2015 3.6L V6-Gas (Denali, SLE, SLT)
●[Pros of Engine Heater Hose Assembly] Features quality plastic T-connectors for added durability. Rubber adapts to temperature extremes, is resistant to wear and tear, and seals well. Come with necessary clamps for easy installation.
●[Package of Heater Food Hose] 1*Heater Inlet Hose. Please confirm your car model and OE number before purchasing. Please check relevant operation video when you replace it.


Description

Heater Inlet HoseHeater Inlet Hose

This is a non-OEM product, accessory only.

Specification:

  • Item Type: Heater Inlet Hose
  • Other Name: Heater Supply Hose
  • Material: Rubber, Aluminum, Plastic

Part Number:

  • 20765678, 626-556

Fitment:

for Saturn Outlook 2007-2009 3.6L V6 - Gas (XE, XR), 2010 3.6L V6 - Gas (XE)

for Chevrolet Traverse 2009-2016 3.6L V6 - Gas (LS, LT, LTZ), 2017 3.6L V6 - Gas (LS, LT, for Premier)

for Buick Enclave 2008-2011 3.6L V6 - Gas (CX, CXL), 2012-2013 3.6L V6 - Gas (Base), 2014-2017 3.6L V6 - Gas (Convenience, Leather, Premium)

for GMC Acadia 2007-2009 3.6L V6 - Gas (SLE, SLT), 2010 3.6L V6 - Gas (SL, SLE, SLT)

for GMC Acadia 2011-2013, 2016 3.6L V6 - Gas (Denali, SL, SLE, SLT), 2014-2015 3.6L V6 - Gas (Denali, SLE, SLT)

Package Included:

  • 1 x Heater Hose (Inlet)

Heater Supply HoseHeater Supply Hose

Hose Length: 37.5cm/14.74"

Branch Length: 28.0cm/11.00"

Hose End (1) Attachment Type: Hose

Hose End (1) Inside Diameter: 1.7cm/0.69", Outside Diameter: 2.6cm/1.04"

Hose End (2) Attachment Type: Quick Connect

Hose End (2) Inside Diameter: 2.2cm/0.85", Outside Diameter: 2.6cm/1.04"

Hose End (3) Attachment Type: Quick Connect

Hose End (3) Inside Diameter: 2.6cm/1.01", Outside Diameter: 2.9cm/1.13"

Maximum Working Pressure (psi): 100 PSI

Heater Supply HoseHeater Supply Hose

Heater Supply HoseHeater Supply Hose

Heater Supply HoseHeater Supply Hose

Good Material

  • Made of quality rubber, anti-corrosion, anti-rust and wear-resistant, long service life. Withstand extreme temperature changes(-40°F to +275°F) and resist cracking and leaking.

Good Workmanship

  • Completely sealed, precise connection without falling off. Come with necessary clamps for easy installation.

Accurate Size

  • Manufactured according to the original size data, exactly match the car in the fitment table, directly replaced is feasible.
Installation GuideInstallation Guide
Heater Supply HoseHeater Supply Hose

  • 1.Remove the pressure cap from the radiator or coolant reservoir and place a bucket or drain pan under the radiator drain valve.

You’ll need a bucket or pan that holds at least two gallons of liquid.

  • 2.Open the drain valve.

Allow the coolant to drain into the container, and then close the valve.

  • 3.Remove the clamps at both ends of the hose.

Clamps are cheap so buy new ones. If you can’t remove them easily, cut them off.

  • 4.Twist the hose to remove it, and use the container to catch the liquid that drains from it.

Be gentle when removing the hose. If you’re not careful, you could damage the radiator.

  • 5.Clean the fittings.

Use any degreaser or just a damp clean rag to clean the fittings that the new hose will attach to.

  • 6.Install the new hose.

Attach and clamp one end securely in place before you tackle the other end. Make sure the hose won’t interfere with any moving parts or touch the engine when it’s hot, and that the clamps are tight.

  • 7.If the coolant that you drained is fairly new and your container was clean, pour the liquid back into the system; otherwise, refill the system with a 50/50 mix of fresh coolant and water.

Be sure to dispose of the old stuff safely.

  • 8.Start the engine and add more water and coolant as the level in the radiator drops.

Don’t fill the radiator to the top of the neck or the coolant reservoir up to the “MAX” line until the thermostat opens. When the upper hose is hot, the thermostat has opened. Then it’s okay to top off the radiator or the reservoir.

  • 9.Replace the pressure cap.

If your engine is the type that needs to be bled, do so now, following the instructions in the owner’s manual or service manual for your vehicle.

Heater Inlet Hose Heater Outlet Hose Heater Hose Assembly
Heater Inlet Hose Heater Outlet Hose Heater Hose Assembly
Customer Reviews
4.3 out of 5 stars
26
5.0 out of 5 stars
15
4.6 out of 5 stars
35
Price $19.99 $19.89 $26.99
OE Number 20765678 25862088 5058729AH
Other Number 626-556 626-562 626-315HP
Replaces 5058729AD 5058729AE 5058729AG
Fitment 1 for Chevrolet Traverse 2009-2017 for Chevrolet Traverse 2009-2017 for Chrysler Town & Country 2011-2016
Fitment 2 for GMC Acadia 2007-2017 for GMC Acadia 2007-2018 for Dodge Grand Caravan 2011-2020
Fitment 3 for Saturn Outlook 2007-2010 for GMC Acadia Limited 2017 for Ram C/V 2012-2015
Fitment 4 for Buick Enclave 2008-2017 for Buick Enclave 2008-2017