Feature
●Replacement HVAC Blower Motor Resistor - Controls the fan speed of your blower motor, If your AC is experiencing failure like Fan Only Runs on High or Fan doesnt Work At All, this Blower Motor Resistor is your way out.
●Compatible Replacement for Honda, Acura Vehicles - 2007-2012 Acura RDX Blower Motor Resistor | 2004-2005 Acura TSX Blower Motor Resistor | 2009-2014 Acura TSX Blower Motor Resistor | 2008-2012 Honda Accord Blower Motor Resistor | 2003-2005 Honda Accord Sedan Blower Motor Resistor | 2001-2011 Honda Civic Blower Motor Resistor | 2012-2015 Honda Crosstour Blower Motor Resistor | 2002-2011 Honda CR-V Resistors | 2003-2011 Honda Element | 2007-2010 Honda Odyssey |2009-2015 Honda Pilot | & more.
●Replace Part Number - for Honda 79330-S5A-942, 79330-S5A-941, 79330-S7A-941, 79330-SDA-A01, 79330-SNA-A01, Replaces 973-452 | 3A1273 | 3A1299 | RU367 | JA1390 | 4P1315 | SW 9962C. This resistor is popular on vehicle Civic, Accord, Element with year 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12.
●Yikesai OEM Design - Save hundreds of dollars from Yikesai by purchasing this part. Though this is NOT a genuine OEM blower motor resistor, it is a direct replacement and it will appear, fit and work like the factory part.
●What youll get - This HVAC Blower Fan Motor Resister comes with a 24 months warranty. If the resistor ever fails on your Acura, Crosstour, CR-V or other vehicle simply contact us for an exchange.
●How To Troubleshoot Resistors - 1. Check if the power supply is normal. 2. Check if the plug is loose. 3. Check if there is a short circuit or current overload in the motor. 4. Check if the onboard computer has output control signals.
Description
HVAC Blower Motor Resistor Compatible with Honda Acura Vehicles Accord Civic CR-V ELEMENT RDX TSX Replaces 79330-S5A-942 79330-SNA-A01 79330-SDA-A01
973-452 Blower Motor Resistor: Control the speed of the vehicle blower motor.
Problem: AC not blowing air, blower motor stuck on one speed, blower motor doesnt work on high or low setting, and blower works when turned off are the common symptoms of a failed blower motor resistor.
Defective or inoperative BMR will result in poor cabin cooling or heating. It may also cause defrosting or insufficient de-icing of the windshield, reducing driver visibility.
When the blower motor is overloaded or the blades are not smooth, it will generate a large current and cause the resistor(BMR) to burn out.
When replacing a faulty blower motor resistor, check the function of other heating, ventilation, and air conditioning system components as they may cause the blower motor resistor to malfunction
Please make sure that this item fits for your car.
|
|
|
|
|---|---|---|
|
compatible with Acura: 2007-2012 Acura RDX Blower Motor Resistor 2009-2014 Acura TSX Blower Motor Resistor 2004-2005 Acura TSX Blower Motor Resistor |
compatible with Honda: 2003-2005 Honda Accord Sedan 4 Door Blower Motor Resistor 2008-2012 Honda Accord Blower Motor Resistor 2008-2012 Honda Accord Coupe Blower Motor Resistor 2001-2011 Honda Civic Sedan Resistor |
compatible with Honda: 2001-2011 Honda Civic Coupe Resistor 2006-2011 Honda Civic NGV Sedan Resistor 2003-2011 Honda Civic Hybrid Sedan Resistor 2007-2011 Honda CR-V Resistor 2002-2006 Honda CR-V (Built in Japan) 2003-2011 Honda Element Blower Resistor 2007-2010 Honda Odyssey 2009-2015 Honda Pilot |
How to Install a Resistor
The ways to install a blower motor resistor, let this warm-hearted customer Nick to tell you:
1. Remove the glove box by pulling the stops on the inside of it, and then unscrewing the bolts at the hinge
2. Remove the bottom dash cover by pulling down from the front, and then pulling the panel straight out towards the seat
3. From the bottom looking up, you’ll see the resistor mounted to the blower motor unit with a wiring harness attached
4. Disconnect the harness
5. The screws holding the resistor on are not torqued down tight, which is good because you won’t be able to get a screwdriver in there for at least the bolt on the left. I just used a small Phillips bit and loosened it by hand. Easy and quick
6. Replace the resistor (plug the harness in AFTER you have the resistor bolted down) and reinstall the panel and glove box
Thanks Nick again.
And enjoy your shopping time!!
|
|
|
|
|---|---|---|
|
|
|
|
