Wearable HD Bluetooth DAC and headphone amp
The GO pod is a pair of wearable Bluetooth DAC/headphone amps designed to make your premium in-ear monitors (IEMs) wireless. The resulting sound is far in advance of any ‘true wireless’ earbuds or Bluetooth headphones.
The iFi GO pod is compatible with an impressive array of high definition Bluetooth formats.
GO pod incorporates two Cirrus Logic MasterHIFI chips – one in the left pod, the other in the right.
The GO pod’s amp has been carefully deigned to ensure ultra-low distortion and a silent background.
Whichever connection type your favourite IEM brand uses, iFi has it covered.
The GO pod comes with a smartly designed charging case that houses a 1500mAH rechargeable battery.
Every possible source device is handled at the highest audio resolution its Bluetooth specification allows.
The GO pod comes equipped with two sets of interchangeable IEM connector loops. (MMCX and 0.78mm 2-pin)
Each critical stage is designed separately and optimised individually to ensure excellent sound quality – Bluetooth, DAC and amplification.
Adjusting the volume on the connected device controls the volume level in the DAC, rather than in the phone, tablet or computer.
Auto impedance detection | 16Ω / 32Ω / 64Ω / 300Ω |
TotalHarmonicDistortion+Noise | ≤0.002% (1KHz/32Ω) @ (20-20KHz) |
Output Max power | 120mW@32Ω; 4V@300Ω; 16Ω: ≥0.98V/60mW; 32Ω: ≥1.96V/120mW; 64Ω: ≥2.77V/120mW; 300Ω: ≥4.0V/53mW |
SNR | 32Ω ≥ 129dB (A) / 300Ω ≥ 132dB (A) |
THD+N | ≤0.002% (1kHz/32Ω) |
Bluetooth version | Bluetooth 5.2 |
Bluetooth codecs | LDAC*, LHDC/HWA*, aptX Adaptive, aptX, ACC, SBC. |
Bluetooth chipset | Qualcomm QCC 5100 Series |
Frequency response | 10-20 kHz(-3dB) LDAC |
Dimensions (GO pod) | 43.5 x 16.4 x 9.5 mm; 1.7" x 0.6" x 0.4" |
Dimensions (Charging case) | 116 x 76 x 38.5 mm; 4.6" x 3" x 1.5" |
Net weight | GO pod 12g (0.42 oz); Case 126g (4.44 oz) |
Power System | 5V/1A or 5V/2A Qi certified charger |
Battery | GO pod 180mAh + Charging case 1500mAh |