Feature
●Faster Acceleration: Pedal Commander eliminates the delay from your electronic gas pedal, allowing your Subaru Crosstrek to accelerate faster, giving your vehicle a night/day difference in performance
●36 Adjustable Settings: Equipped with 4 different modes: Eco, City, Sport, and Sport +. Each mode has an additional 36 adjustable settings to fine-tune to your liking, making this a must have Subaru Crosstrek accessory
●Eco Mode: The Pedal Commander throttle response controller significantly slows throttle response to improve efficiency
●Quick & Easy Installation: Pedal Commander is a simple plug-and-play device that takes only about 10 minutes to install. Now Bluetooth compatible, you can control the unit using our free Pedal Commander app
●Will Not Void Your Warranty: Pedal Commander will not void the warranty on your Subaru Crosstrek or leave any trace behind on your ECU
Description
Pedal Commander for Subaru Crosstrek (2013-2024) - Throttle Response Controller
Say goodbye to laggy throttle delay in your Subaru Crosstrek. Forever.
Say goodbye to the throttle response delay in your gas pedal. Forever.
Have you noticed that older Subaru Crosstreks were more responsive and quicker to take off? That’s because older Crosstreks were operated with mechanical throttle cables, which means everything happened instantaneously. Today’s newer Subaru Crosstreks lack the response that came with throttle cables. Because they are now controlled by the vehicle’s computer, it doesn’t matter how fast you push your gas pedal to the floor, you don’t have access to all the power and responsivness your Subaru Crosstrek has to offer. Pedal Commander is the solution!
Pedal Commander is the world’s most advanced throttle controller that allows your Subaru Crosstrek engine to respond faster and gives you the acceleration you want, when you want it! By amplifying and speeding up the signal being sent from the sensor on your gas pedal to the vehicles ECU (computer), our throttle response controller removes response delays on any vehicle with an electronic gas pedal.
Pedal Commander is one of the most demanded Subaru Crosstrek accessories on the market. Live Life Full Throttle and fall in love with your Subaru Crosstrek all over again!
it is compatible with
Subaru Crosstrek Base Premium Limited Sport
Why Do You Need the Pedal Commander on your Subaru Crosstrek?
The Pedal Commander will give you the instantaneous throttle response that is missing in Subaru Crosstrek.
With the Pedal Commander, you can finally experience 100% of what your vehicle has to offer. Take your vehicle’s performance back into your hands and drive the way YOU want.
Maximize your Subaru Crosstrek driving experience
Pedal Commander is entirely compatible with any other aftermarket parts you may already have. Since we don’t use the OBDII port, or boost sensor. It’s a perfect match to complement your existing tune or programmer to fully customize your Subaru Crosstrek driving experience.
Control Pedal Commander on your phone
In case your Pedal Commander unit is out of reach and hidden somewhere underneath your dash, weve made it accessible to control the unit right through your phone with our free app for iOS (10.0 +) and Android (5.0+).
FEATURES
- 36 Different Ways to Drive
- Easy Plug-And-Play Installation
- Bluetooth Compatible
- Fuel Economy
4 modes 36 Driving Options
|
|
|
|
|
|---|---|---|---|
Eco ModeECO Mode allows you to maximize your Subaru Crosstreks fuel economy by up to 20% over the stock ratings. Its slower response also allows for better traction over terrains like snow, rain, mud, dirt, etc. |
City ModeCustomer favorite, City Mode, gives your vehicle the response of an "old school" throttle cable, with a 1:1 pedal-to-throttle ratio. This mode is popular among daily drivers as it gives your Subaru Crosstrek a perfect balance of performance and practicality. |
Sport ModeSport Mode is a favorite amongst spirited drivers looking to get-up-and-go. This mode allows for a significantly increased throttle response, and is not for the light-hearted. If youre looking to make your Subaru Crosstrek commute more exciting, use Sport Mode. |
Sport+ ModeSport+ Mode is the most extreme mode we have to offer. Its extreme high performance response allows your Crosstrek to accelerate like a race car. This mode should be used with caution! |
Space Saving Design
Plug And Play
- Use the flat head screwdriver to pop out the small round screw cover on the base of the throttle assembly
- Unscrew the Torx T30 screw
- Pull the base of the assembly slightly up and forwards
- The throttle is connected with a wiring harness. Pinch the sides and it pulls right off.Easy plug-and-play method for hassle-free installation. Installing the Pedal Commander takes only 15 minutes.
- Pedal Commander will not leave "flags" on the ECU
Pedal Commander works harmoniously with Subaru Crosstrek
Unleash Your Subaru Crosstreks Potential with Pedal Commander
Yes! Pedal Commander is a safe performance upgrade that only gives you the performance reserved by the manufacturer. It will only be switched on when you really need the power and will not push your vehicle beyond its original safety measures.
- Pedal Commander enhances your driving experience by allowing quicker access to your engines existing horsepower with an amplified signal.
- Pedal Commander throttle controller complements any other mods and upgrades like tuners, programmers, performance chips, cold air intakes, performance filters, or aftermarket add-ons.
- We only intercept the electronic signal and uniquely remap the throttle curve, so its beauty lies in its simplicity.
- Discover a new level of driving pleasure with expertly-crafted custom throttle maps that deliver lightning-fast precision and optimal performance.
Made for performance enthusiasts
Unleash the Power: Pedal Commander, Backed by Renowned Industry Experts, Elevates Your Driving Experience
Get ready to ignite your driving experience with Pedal Commander, the revolutionary throttle response controller thats causing a sensation!
Subaru Crosstrek Performance
What`s in the box?
- Pedal Commander for Subaru Crosstrek 2013-2024
- Harness with OEM plug
- Wet wipe (Use gently)
- Zip ties
- User manual
INSTALLATION
1. Turn off Ignition.
2. Keep your key fob (if applicable) at least 35 ft. (10m) away from your Subaru Crosstrek. This prevents your car from using power to transmit signals to your proximity key fob sensor.
3. Leave your driver’s door open for 15 minutes to allow your ECU to shut down completely.
4. Locate and disconnect your accelerator pedal assembly plug.
5. Plug in your Pedal Commander in line with your accelerator pedal assembly plug until you hear a “click.”
6. Make sure the cables are tucked in place so they do not interfere with your driving experience.
7. Place and mount the Pedal Commander to your desired location using the velcro and mounting bracket thats included in the box.
IMPORTANT
To avoid receiving check engine lights or other issues, it is important that you follow these instructions properly. Also, please ensure that you hear a “click” sound while connecting the plugs, as this signifies a secure connection.
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| For Subaru Crosstrek (2013 and newer) | Click for Subaru Forester (2002-2008) | Click for Subaru Outback (2005-2009) | Click for Subaru Forester (2008 and Newer) | Click for Subaru Outback (2010-2019) | Click for Subaru Outback (2020 and Newer) | |
| Customer Reviews |
49
|
— |
— |
2
|
7
|
3
|
| Price | $274.99 | $274.99 | $274.99 | $274.99 | $274.99 | $274.99 |
| Bluetooth | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Plug-n-play | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |