Feature(may vary by option.)
●Eliminate throttle response delays in your Ford Broncos acceleration performance, this makes it one of the essential Ford Bronco accessories
●Choose from 4 adjustable modes with 36 throttle sensitivity settings: Eco, City, Sport, Sport+. Works perfectly with other performance upgrade parts like tuners, mods, cold air intakes, programmers, and chips
●Pedal Commander throttle response controller is a plug-&-play Ford Bronco performance part that won`t void your Bronco`s warranty
●Improve fuel economy by up to 20% in your Ford Bronco with Pedal Commander throttle response controller`s Eco mode
●Please check the description and Amazon fitment guide for your vehicle fitment info. Fits: Ford Bronco 2021 and later models Base, Big Bend, Black Diamond, Outer Banks, Wildtrack, Badlands, Raptor (2.3L 2.7L)
[Ford Bronco Sport 2021+]
Description
Pedal Commander for Ford Bronco U725 (2021-2024) - Throttle Response Controller
Say goodbye to laggy throttle delay in your Ford Bronco Forever.
Say goodbye to the throttle response delay in your gas pedal. Forever.
Have you noticed that older Broncos were more responsive and quicker to take off? That’s because older Broncos were operated with mechanical throttle cables, which means everything happened instantaneously. Today’s newer Broncos lack the response that came with throttle cables. Because they are now controlled by Bronco’s computer, it doesn’t matter how fast you push your gas pedal to the floor, you don’t have access to all the power and responsiveness your Bronco has to offer. Pedal Commander is the solution!
Pedal Commander is the world’s most advanced throttle controller that allows your Bronco engine to respond faster and gives you the acceleration you want when you want it! By amplifying and speeding up the signal being sent from the sensor on your gas pedal to the Broncos ECU (computer), our throttle response controller removes response delays on any Bronco with an electronic gas pedal.
Pedal Commander is one of the most demanded Ford Bronco accessories on the market. Live Life Full Throttle and fall in love with your Ford Bronco all over again!
it is compatible with
Ford Bronco 2.3L 2.7L 3.0L engines
Why Do You Need the Pedal Commander on your Ford Bronco ?
The Pedal Commander will give you the instantaneous throttle response that is missing in the Ford Bronco.
With the Pedal Commander, you can finally experience 100% of what your vehicle has to offer. Take your vehicle’s performance back into your hands and drive the way YOU want.
Maximize your driving experience
Pedal Commander is completely compatible with any other aftermarket parts you may already have. And since we don’t use the OBDII port, this means it’s a perfect match to compliment your existing tune or programmer to fully customize your Ford Bronco driving experience.
Control Pedal Commander on your phone
In case your Pedal Commander unit is out of reach and hidden somewhere underneath your dash, weve made it accessible to control the unit right through your phone with our app for iOS (10.0 +) and Android (5.0+).
FEATURES
- The Pedal Commander significantly improves throttle response, reducing lag when accelerating
- Customize and switch between driving modes for spirited driving, fuel efficiency, or daily commuting
- The Pedal Commander is explicitly designed for your Bronco`s model and year
- Easy Installation, user-friendly setup
- Bluetooth enabled, mobile app control
4 modes 36 Driving Options
|
|
|
|
|
|---|---|---|---|
Eco ModeECO Mode allows you to maximize your Broncos fuel economy by up to 20% over the stock ratings. Its slower response also allows for better traction over terrains like snow, rain, mud, dirt, etc. |
City ModeCustomer favorite, City Mode, gives your Bronco the response of an "old school" throttle cable, with a 1:1 pedal-to-throttle ratio. This mode is popular among daily drivers as it gives your Ford Bronco a perfect balance of performance and practicality. |
Sport ModeSport Mode is a favorite amongst spirited drivers looking to get-up-and-go. This mode allows for a significantly increased throttle response, and is not for the light-hearted. If youre looking to make your Ridgeline daily commute more exciting, use Sport Mode. |
Sport+ ModeSport+ Mode is the most extreme mode we have to offer. Its extreme high performance response allows your Ford Bronco to accelerate like a race car. This mode should be used with caution! |
Space Saving Design
Plug And Play
- Use the flat head screwdriver to pop out the small round screw cover on the base of the throttle assembly
- Unscrew the Torx T30 screw
- Pull the base of the assembly slightly up and forwards
- The throttle is connected with a wiring harness. Pinch the sides and it pulls right off.
- Pedal Commander will not leave "flags" on the ECU.
Pedal Commander works harmoniously with Ford Bronco
Unleash Your Broncos Potential with Pedal Commander - Safe and Reliable Performance Upgrade
Pedal Commander is easy to install and has a plug-and-play setup. Enjoy optimized performance through vehicle-specific programming tailored to your Bronco.
- Pedal Commander enhances your driving experience by allowing quicker access to your engines existing horsepower with an amplified signal.
- Pedal Commander throttle controller complements any other mods and upgrades like tuners, programmers, performance chips, cold air intakes, performance filters, or aftermarket add-ons.
- We only intercept the electronic signal and uniquely remap the throttle curve, so its beauty lies in its simplicity.
- Discover a new level of driving pleasure with expertly-crafted custom throttle maps that deliver lightning-fast precision and optimal performance.
Ford Bronco Performance
What`s in the box?
- Pedal Commander for Ford Bronco 2021-2024
- Harness with OEM plug
- Wet wipe (Use gently)
- Zip ties
- User manual
INSTALLATION
1. Turn off Ignition.
2. Keep your key fob (if applicable) at least 35 ft. (10m) away from your Ford Bronco. This prevents your car from using power to transmit signals to your proximity key fob sensor.
3. Leave your driver’s door open for 15 minutes to allow your ECU to shut down completely.
4. Locate and disconnect your accelerator pedal assembly plug.
5. Plug in your Pedal Commander in line with your accelerator pedal assembly plug until you hear a “click.”
6. Make sure the cables are tucked in place so they do not interfere with your driving experience.
7. Place and mount the Pedal Commander to your desired location using the velcro and mounting bracket thats included in the box.
IMPORTANT
To avoid receiving check engine lights or other issues, it is important that you follow these instructions properly. Also, please ensure that you hear a “click” sound while connecting the plugs, as this signifies a secure connection.
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| For Ford Bronco (2021 and Newer) | Click for Ford Bronco Sport (2021 and Newer) | Click for Ford F-150 Raptor F150 (2011-2021) | Click for Ford F-150 Trucks (2011 and Newer) | Click for Ford Taurus (2013 and Newer) | Click for Ford EcoSport (2017 and Newer) | |
| Customer Reviews |
58
|
58
|
1,899
|
1,899
|
9
|
— |
| Price | $274.99 | $274.99 | $274.99 | $274.99 | $274.99 | $274.99 |
| Bluetooth | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Plug-n-play | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |