[2]
[6]
This module is mainly placed behind the stepper motor to obtain the rotation angle of the stepper motor. This principle is to use the AS5600 magnetic encoding, and then stick a magnet on the main shaft of the stepping motor. Information such as the rotation speed of the spindle can be obtained through magnetic encoding.
Specification:
Product parameter: AS5600 magnetic encoder
Color: As pictures shown.
Size: approx. 23x23mm(0.91x0.91in)
Product type: Non-contact magnetic induction
Out mode:IIC ,PWM, voltage, etc.
Interface description:
VCC: 3.3 V
GND: Power Ground
Out: PWM / analog voltage output
DIR: Rotational direction (grounding=clockwise value increases ; Connect to VCC =Clockwise values decreased)
SCL: IIC communication clock line
SDA: IIC communication data line
GPO: Mode selection (internal pull-up, ground=Programming mode B)
Feature:
1.It is made of KB-A grade FR-4 glass fiber board with a thickness of 1.6mm. The board surface is flat and not easy to be bent. Each PCB board has been tested by flying probes before leaving the factory, and the quality is worth relying on.
2.Non-contact magnetic induction angle measurement module. High precision, multiple output modes, IIC, PWM, voltage, etc.
3.AS5600 is also equipped with an intelligent low power consumption mode, which automatically reduces power consumption. The input pin (DIP) selects the output polarity rotation direction.
Note:
Please allow 1-3cm error due to manual measurement.
Package includes:
2x AS5600 Magnetic Encoder