Feature(may vary by option.)
●Specs: 1/4" Cutting Diameter, 1/4" Shank, 1" Cutting Length, 2" Overall Length, 2 Flutes, Compression (Up and Down Cut) Spiral Bits.
●-Spiral compression router bit used for smoothly upcut and downcut groove and slots, Mortises, Cycles and dados, Plunge cut leave with clean edge and top surface.
●- HIGH PROCESSING EFFICIENCY: The edge of end mill bits is HARD and SHARP, process the heat treatment materials under 32° with high speed, reduce changing times and improve the production efficiency.
●- STRONG and DURABLE: High Hardness and Heat Resistance. The spiral end mill bits are made from Ultra-fine steel bar, with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications.
●- CUTTING EDGE DESIGN: The bottom of spiral router bit is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency.
[10 3.175mm Shank-3.175mm Cutting Dia-17mm CEL]
[2 6mm Shank-6mm Cutting Dia-25mm CEL]
[5 6mm Shank-6mm Cutting Dia-22mm CEL]
[1 1 & 4 Shank-1 & 4 Cutting Dia-1 CEL]
[2 6mm Shank-6mm Cutting Dia-22mm CEL]
[2 6mm Shank-6mm Cutting Dia-32mm CEL]
[5 6mm Shank-6mm Cutting Dia-25mm CEL]
[2 1 & 4 Shank-1 & 4 Cutting Dia-1 CEL]
[10 3.175mm Shank-3.175mm Cutting Dia-22mm CEL]
[5 6mm Shank-6mm Dia-32mm CEL]
[5 1 & 4 Shank-1 & 4 Cutting Dia-1 CEL]
[5 4mm Shank-4mm Cutting Dia-22mm CEL]
Description
The Compression Router Bit
The compression cutters are designed with both up and down-cut flutes. The top portion of the length of cut, closest to the shank, has a left hand spiral, forcing chips down.
when using the compression bit, you must ensure the first pass is below the upcut portion of the bit, or you will get results similar to just cutting with an upcut bit; Using a ramp in, plunging into the material over a distance instead of all at once, and a lead in, starting outside the design to get to the pass depth, it will ensure that the entire piece is perfectly clean on the top and bottom. Compression bits are designed to cut in a single pass, however, if your machine cannot handle that depth of cut you can cut in multiple passes, as long as that first pass is below the upcut portion of the bit.
|
|
|
|
|---|---|---|
INDUSTRIAL QUALITY
|
DLC COATING
|
Universal Chamfered Round Handle
|
Suitable Material
For carving/cutting/engraving/milling/slotting/sculpturing in materials like MDF, ABS, PVC, PCB, SMT, CNC, acrylic, nylon, resin, plastics, density board, wood, plywood, hardwood etc. Ideal for three-dimensional sculpture, surface machining, 3D relief sculpturing etc.
Specifications:
- Flute: 2
- Cutting Diameter: 1/4"
- Cutting Length: 1"
- Shank Diameter: 1/4"
- Full Length: 2"
- Material: Carbide (Tungsten steel)
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| Titanium Coat Carbide End Mill | 1/8 Inch Straight Router Bits Set | Carbide Square End Mill for Aluminum | CNC Spoilboard Surfacing Router Bit | CNC Single Flute Router Bits | Downcut Bit | |
| Customer Reviews |
469
|
559
|
37
|
2
|
34
|
268
|
| Price | $16.99 | $18.99 | $28.99 | $16.99 | $25.99 | $15.99 |
| Shank Diameter | 1/8" | 1/8" | 1/8" | 1/2" | 1/8" | 1/8" |
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| Compression Bit | Single Flute (O Flute) Spiral End Mill | 2 Flute UP Cut Router Bit | Compression Bit | 3 Flutes TCT Straight Router Bit | Neon Light Strip Slotting Bits | |
| Customer Reviews |
984
|
6
|
30
|
9
|
1
|
7
|
| Price | $17.99 | $17.99 | $18.99 | $18.99 | $11.99 | $21.99 |
| Item Shank | 1/4" | 1/4" | 1/4" | 1/4" | 1/2" | 3/8" |
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| BT30 ER32-45L Balance Collet Chuck | ISO30 ER32-45L Balance Collet Chuck | ISO30 Tool Holder Clamp | ER20 Spring Collet Set | ER32 Collet Set | Setup Blocks Height Gauge Set | |
|
|
||||||
| Customer Reviews |
1
|
70
|
75
|
1
|
2
|
— |
| Price | $23.99 | $95.99 | $27.99 | — | $70.99 | $35.99 |
| Model Number | BT30 ER32-45L | ISO30 ER32-45L | ISO30 | ER20 | ER32 | Setup Blocks Height Gauge Set |