Feature(may vary by option.)

●1.Reliable Quality : The KSD301 snap disc thermostat switch made of EMS bimetal disc from USA . Large capacity contacts with a diameter of 3.5mm.UL&CUL approval（E527364).Precise temperature control and durable;
●2.Wide Operating Voltage : KSD301 high limit thermostat work as well with AC or DC voltage, AC110V/120V/125V/250V/16A; DC12V/24V/48V/20A;
●3.Action Type: NC (Normally Close): The original state of the thermal cutoff switch contact is normally close. Circuit Off at 150°C/302°F;and On at 130°C/266°F(+/- 5°C); Its auto reset;
●4.Easy to Install and Save Money: Thermal control switch with stainless steel movable flange and easy to install. Enjoy the DIY, you can do it;
●5.Wide Applications: Replaces most fixed snap action thermodisc on heating equipment and appliances. Such as: coffee machine, toaster, microwave,oven, hanging ironing machine, RV refrigerator heater fuse,RV dometic fridge,heater,air fryer,etc;

[120°C & 248°F]

[200°C & 392°F]

[220°C & 428°F]

[150°C & 302°F]

[240°C & 464°F]

Description

Name: KI31/KSD301 Snap Disc Switch

Use：Temperature control/Overheat protection

Action type: Normally Closed（NC）

Voltage and current：AC125V~250V/16A; DC24V/48V/20A

Operating Temperature：110-240°C(230-464°F)

Temperature accuracy：±5℃; ±8℃; ±10℃

Contact resistance：≤50MΩ

Insulation resistance：≥100MΩ

Life span：About 100,000 times

Electrical strength：AC 50Hz 1800V lasted for 1min, no flicker, no breakdown

Size (Each)：1.34" x 1.18"x 0.47" (L*W*H)

Mounting Hole Spacing：23.8mm / 0.937inch

Pin width：6.3mm/0.25inch

Package Content：2pcs x KSD301 Thermostat Switch

KSD301 snap Disc Switch Working Principle

Tips:

1.KSD301 and KI 31 are the same 1/2 inch thermostat, but the way of naming is different, the same type has a well-known manufacturers model KSD302/KSD303/KSD201/1NT/TK 24/36T /US-118 /T11 and other names. Performance is consistent and all are interchangeable.

2.When you choose to control temperatures above 120 degrees, engineers recommend choosing a ceramic shell thermostat. Because in actual operation, there is a high amount of waste heat generated during heating after the thermostat is activated. Ceramic thermostats are more resistant to high temperatures and have more stable quality

Installation Precautions:

1.Before installing this part, unplug the household appliances,Cut off the power completely.

2.Take a picture first before removing any parts, so you know how to restore everything at the end.

3.The temperature controller is a series circuit, not parallel, installation must refer to the original product circuit design.

4.Do not collapse, loosen or deform the top of cover surface during installation to avoid affecting performance.

5. Lock the screw hole, should be fixed at the same time, then lock, avoid the bracket to the other side of the tilt, resulting in temperature control aluminum cover deformation, temperature control parameters change.

6. For the sake of safety, the connecting wire terminal shall be insulated and closed.

7.Do not allow liquid to penetrate into the interior of the thermostat or crack the housing.

8.The thermostat should be stored in a warehouse with RH less than 90% and ambient temperature less than 40 ℃, which is ventilated, clean, dry.

9. CHOKING HAZARD -- Small parts. Not for children under 3 yrs.


Self-assembling Machine for Snap Disc Thermostat Customized, high production capacity, fast speed, stable quality. Each component is carefully selected, high precision, high efficiency.	Automatic Detection System for Thermal Cut-off switch Before packaging, each temperature control switch will be checked by an automatic inspection machine, and unqualified products will be picked out.	Rapid Action Bimetal Disc Thermostat KI31 and KI32 quick action thermal temperature switch. Widely used in instant hot water dispenser/ faucet, dishwasher and other thick film heating products;