Feature
●Combo 2/3 jaw gear pull 4
●Tool solutions for most all situations
●Built to exceed tool standards
●Strong and dependable enough to last a lifetime
●Kit services: many Domestic V8 and V6 engines with harmonic balancers with threaded holes
●Tool set for removal and installation of harmonic balancers that have threaded holes
●For use on many US made V6 and V8 engines
Description
Powerbuilt Harmonic Balancer and Crank Pulley Puller & Installer Kit
Sometimes a harmonic balancer just doesn’t want to come loose but using a pry bar may damage the part. Loosen it the easy way with the innovative crankshaft pulley and harmonic balancer puller and installer set. Just fasten the 2/3 combination yoke to the balancer with the included bolts and twist the center screw until the harmonic balancer breaks free. Strong and dependable enough to last a lifetime.
Kit Services: Many domestic V8 and V6 engines with harmonic balancers with threaded holes. Also services many 1990 and newer Chrysler crankshafts.
Any specialty tool will help make an automotive repair or maintenance task easier, but Powerbuilt automotive installer tools take the concept of ‘help’ a big step further. It starts with the storage case – heavy-duty design ensures it will stand up to years of use and abuse. Inside the case lid you’ll find how to instructions and photos that show step-by-step usage instructions.
Set includes
- 3/4" x 16 installer
- 7/16" x 20 installer
- 1/2" x 20 , 9/16" x 18 , and 5/8" x 18 installer;
- M12 x 1.5 , M14 x 1.5, and M16 x 2.0 installer
- 2/3 combination yoke and Center point
- Puller center screw 5/8" x 5-7/8" _ 18 NF
- 3/8" _ 24 x 2" NF bolts (3)
- 5/16" _ 18 x 2" NC bolts (3)
3/8" _ 16 x 4" NF bolts (2)
- 80 _ 1.25 x 80mm bolts (3)
- 10 _ 1. 5 x 50mm bolts (3)
- Thrust bearing
- Nut 7/8" NF
- Jam nut
- Installer center screw (7/8" x 4-1/4" NF);
- Pulley puller center bolt
- Long and short pushrod
- Pulley puller
- Storage case
|
|
|
|
|---|---|---|
|
|
|
|
