Feature(may vary by option.)

●The carbon fiber rods are used for quadcopter helicopters, RC airplanes, scale models, railing, indoor kite making, repairing a graphite fishing pole, wing or tails reinforcing, 3D printers, arrow rods,DIY subject support poles, nets, Tents, bows, hatches, PCB equipment shafts, luggage, hand rod sand reinforcing for RC planes, etc.
●Material: Carbon Fiber;Diameter: 3mm(0.12 inch);Length: 500mm(19.7 inch);Pack of 15pcs x Carbon Fiber Round Rod;
●Great for construction that requires great strength without excess weight; High strength, corrosion resistance, surface smoothness, straightness good, stable performance; Its specific strength and elastic modulus are actually higher than carbon steel, yet it is lighter than aluminum; It has good electrical conductivity and very good tensile strength.
●Carbon fiber rods perform particularly well in bending or compression applications. can be cut to any length.
●Please allow 1-5mm error due to manual measurement.

[2mm x 100mm 20]




[2mm x 400mm 30]




[2mm x 300mm 16]




[4mm x 100mm 15]




[1mm x 150mm 16]




[1mm x 400mm 20]




[2mm x 100mm 16]




[2.5mm x 300mm 12]




[3mm x 200mm 20]




[1mm x 300mm 15]




[1mm x 400mm 30]




[1mm x 300mm 12]




[1mm x 100mm 16]




[2mm x 100mm 48]




[1mm x 300mm 20]




[1mm x 100mm 20]




[1mm x 300mm 24]




[1mm x 100mm 24]




[1.5mm x 300mm 16]





Description

Carbon Fiber Rod

Carbon Fiber RodCarbon Fiber Rod

Premium carbon fiber rods are made from 100% high-strength carbon fiber reinforcement and epoxy resin, giving them a smooth, shiny, and beautiful carbon fiber surface.

  1. Lightweight: Carbon fiber is significantly lighter than steel and almost twice as light as aluminum when comparing similar sized pieces. This makes carbon fiber rod an excellent choice when weight reduction is desired without compromising strength.
  2. High Strength & Stiffness: Carbon fiber reinforced polymer (CFRP) exhibits the highest specific strength and modulus (stiffness) per density compared to metals, plastics, and wood. This exceptional strength and stiffness make carbon fiber rod suitable for applications that require structural integrity and load-bearing capabilities.
  3. Low Thermal Expansion: Unlike metals that expand and weaken when exposed to heat, carbon fiber has low thermal expansion. This property reduces the risk of issues or failure due to thermal expansion, making it a reliable choice in high-temperature applications.
  4. Low Thermal Conductivity: Metals, especially aluminum, are known for their high thermal conductivity, which can lead to heat transmission or heat soak. In contrast, carbon fiber has low thermal conductivity, minimizing heat transfer and providing insulation properties.
  5. RF Shielding: Carbon fiber has the ability to attenuate or block radio frequency waves, making it effective for shielding against unwanted radio transmissions. This property helps protect devices from scanners or potential data breaches, ensuring data security.

Various sizes---Rich categories, different diameters and lengths to choose from

Carbon Fiber RodCarbon Fiber Rod

  • Diameter:0.5mm,1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,7mm,8mm,9mm,9.5mm,10mm,12mm
  • Length:100mm,150mm,200mm,300mm,400mm,420mm,450mm,500mm

Carbon Fiber RodCarbon Fiber Rod

Carbon Fiber RodCarbon Fiber Rod

Carbon Fiber RodCarbon Fiber Rod

High Strength

Carbon Fiber Rod offers excellent strength, allowing it to withstand heavy loads and provide structural stability.

Stable Performance

It demonstrates consistent and reliable performance under varying conditions, providing structural integrity over time.

Widely Use

Carbon Fiber Rod are suitable for aviation model aircraft, model cars, multi-rotor support rods, model boats, racing cars, robots, DIY aircraft production, 3D printers, arrow rods, kites, windmills, sails, DIY subject support poles, mosquito nets, Tents, bows, hatches, PCB equipment shafts, luggage, hand rods.