Feature(may vary by option.)
●👍 TOPPING D50 III - 3rd Generation Upgraded Version ▶️ The D50 III uses 2x ES9039Q2M, one for the left channel and another for the right channel,which delivers higher SNR(132dB), higher dynamic range(132dB), and lower distortion(<1.3uVrms) than the D50s. A brand new I/V conversion circuit is designed for better audio reproduction. The D50 IIIs ability to restore music has reached a new level with its details perfectly displayed.
●👍 LDAC wireless available ▶️ D50 III is equipped with QCC5125 and Bluetooth 5.1. It is compatible with LDAC/aptX-Adaptive/aptX-HD/AAC/SBC, supporting up to 96kHz/24bit. So that high-quality audio can be transmitted wirelessly to obtain music experience beyond CD level.
●👍 Plug and play ▶️ D50 III has a wide range of compatibility and applies to various OS such as Windows 10, Windows 11, MAC, Linux and iOS/Android. Only for Windows ASIO applications, you need to install the driver and set it up. The USB hardware is based on XMOS XU316 andThesycon driver (Drivers only for Windows, other OS neednt driver). In addition, the D50 III supports up to PCM768kHz/32bit and DSD512.
●👍 Dual Type-C interface,Fast and stable ▶️ Use Type-C for signal transmission and power. It is recommended to add an auxiliary power supply for better performance when the D50 III is often fixed on a desktop or connected to a cell phone for use.
●👍 Ten-band PEQ adjustment ▶️ We develop a brand new PEQ adjustment*that supports ten customizable frequency bands. Toppings brand new PEQ algorithm and desktop software allow you to fine-tune the frequency, gain, and bandwidth of each PEQ band. The software supports the import of target and original curves as well as the compensation of curves using target curves. It can also save multiple profiles for easy switching.*The PEQ function supports up to PCM 192kHz/32bit. This function is supported only for USB input.
●👍 Choose your output mode at will ▶️ The D50 III has not only RCA output, but also TRS balanced output, which are widely used in the professional field. In addition to the versatile TRS 4V and RCA 2V outputs, the D50 III adds TRS 5V and RCA 2.5V. Adapt more devices when selecting TRS 4V and RCA 2V. Take performance to the next level when selecting TRS 5V and RCA 2.5V.
●👍 Preamplifier function - Desktop speaker companion ▶️ In addition to the DAC mode, the D50 III also has a "preamp" mode. In preamp mode, you can adjust the volume at D50 III, maximizing ease of use with active speakers or pure power amplifiers.
●👍 Perfect partner—A50 III ▶️ The D50 III and A50 III have the same design language. This combination has unique metallic aesthetics no matter how its placed. And they meet the needs of most headphones and active speakers. The A50 III can also be switched on and off with the D50 III via 12V Trigger.
[SILVER]
[BLACK]
Description
Compact but Powerful
TOPPING D50 III
Desktop HiFi DAC
Product Detail
Attribute
- Power input: USB Type-C port(DC5V/1.0A)
- Signal input: USB/BT/OPT/COAX
- Line Out output: 1 ×TRS (L+R), 1 ×RCA (L+R)
- Other connectors: 12V Trigger Out (3.5mm jack)
- Bluetooth range: >10M
Contents list
- D50 III
- Remote control
- USB A-C cable, USB C-C cable
- Bluetooth antenna
- Product information Card, Guide for Bluetooth remote
Powerful without explanation
-
LDAC wireless available
D50 III is equipped with QCC5125 and Bluetooth 5.1. It is compatible with LDAC/aptX-Adaptive/aptX-HD/AAC/SBC, supporting up to 96kHz/24bit.
-
Plug and play
D50 III has a wide range of compatibility and applies to various OS such as Windows 10, Windows 11, MAC, Linux and iOS/Android.
-
Dual ES9039Q2M
The D50 III uses 2x ES9039Q2M, one for the left channel and another for the right channel,which delivers higher SNR, higher dynamic range, and lower distortion than the D50s.
-
Brand new I/V conversion
The new circuit design provides lower distortion and lower noise while occupying less space. Designed to approach physical limits in order to maximize the full performance of the DAC chip.
-
Ten-band PEQ adjustment
Toppings brand new PEQ algorithm and desktop software allow you to fine-tune the frequency, gain, and bandwidth of each PEQ band.
-
CNC Unibody
CNC machining provides excellent electromagnetic shielding while giving the D50 III a smooth appearance and superior strength.
The D50 IIIs ability to restore music has reached a new level with its details perfectly displayed.
- THD+N (5V A-wt) <0.00006%
- SNR 132dB, DNR 132dB
- Noise <1.3uVrms
Dual Type-C interface
Use Type-C for signal transmission and power.
Recommrended to add an auxiliary power supply like TOPPING P50 for better performance.
Choose output mode at will
In addition to the versatile TRS 4V and RCA 2V outputs, the D50 III adds TRS 5V and RCA 2.5V. Adapt more devices when selecting TRS 4V and RCA 2V.
Preamplifier function
In preamp mode, you can adjust the volume at D50 III, maximizing ease of use with active speakers or pure power amplifiers.
Bluetooth remote control
The 2.4G Bluetooth remote control is unaffected by obstacles. It can be freely remote-controlled from a long distance for more flexible use.
12V Trigger
The D50 III is equipped with 12V Trigger output, which supports switching on and off synchronously with other devices.
Perfect partner—A50 III
The D50 III and A50 III have the same design language. This combination has unique metallic aesthetics no matter how its placed. And they meet the needs of most headphones and active speakers. The A50 III can also be switched on and off with the D50 III via 12V Trigger.