Feature

●DHT11 digital temperature and humidity sensor is a digital signal output with a calibrated temperature and humidity combined sensor.
●It uses a dedicated digital modules and acquisition of temperature and humidity sensor technology to ensure that products with high reliability and excellent long term stability.
●Sensor consists of a resistive element and a sense of wet NTC temperature measurement devices, and with a high-performance 8-bit microcontroller connected.
●The product has excellent quality, fast response, anti-interference ability, high cost and other advantages.
●The single-wire wiring scheme makes it easy to be integrated to other applications.And the simple communication protocol greatly reduces the programming effort required.


Description

Instruction:
This sensor module utilizes DHT11 as the sensitive component and has a bypass capacitor and a pull-up resistor on-board. The DHT11 is a pre-calibrated digital output temperature and humidity sensor. The single-wire wiring scheme makes it easy to be integrated to other applications. The simple communication protocol greatly reduces the programming effort required.

Specification:
Power supply voltage: 3.3~5.5V DC
Output: the single bus digital signal
Measuring range: 20-90%RH humidity, temperature 0~50°
The measurement accuracy of +-5%RH: humidity, temperature +-2 °
Resolution: 1%RH humidity, temperature 1 °
Exchangeability: fully interchangeable
Long term stability: <± 1%RH
Size: 28 * 12 * 7.2mm

Interface Description:
1.VCC:External 3.3 V-5 V
2.GND:External GND
3.DO:Small board switch digital output interface, connect the microcontroller IO port

Package Included:
5* DHT11 Module
5* Dupont Cable