Feature
●Annular Cutter Size :9/16”Cutting Diameter,1"Cutting Depth, 3/4” Weldon Shank with 2 Flat,Pilot Piin Size: 6.34x77mm
●OSCARBIDE Annular bits will drill large holes up to ten times faster than regular drill bits,and the mag drill bits are thin-walled and have dual alternating teeth for efficient and aggressive cutting that is easier than traditional hole saws and twist drill bits,It can drill a much larger hole and requires less force and time.
●These HSS Slugger Bit ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips.
●OSCARBIDE annular Bit fits most standard magnetic drills and machine tools such as mills and large drill presses with tool holders
●These annular cutters are suitable for working with both ferrous and non-ferrous metals,cast iron, stainless steel, aluminum, copper, and plastic,wood, in either plate or pipe form.Hole processing field such as engineering,rail transit, bridges, ships, machinery manufacturing, aerospace. Mild & Structural Steel
Description
OSCARBIDE Annular Cutter 9/16"x1"
-
Material:
Made with premium high speed steel material, for longer service life and high heat resistance,the biggest advantage of HSS core drill is its ability to re-sharpen.
-
Time saving:
The annular cutters have fewer teeth and less wear, therefore with an annular cutter holes can be made at higher or faster cutting speed and a faster feed rate of the drilling
-
Energy savings:
Because annular cutters do not have to drill/cut through the complete work piece, they require less thrust and thus less energy to drill through material.
-
More finishing:
The hole made using an annular cutter is more finished, precise and accurate.
-
Easy Using:
Due to the unique geometry of the annular cutters, making holes at awkward angles is also very easy.
-
Re-sharpening:
Can be easily re-sharpened on a grinding machine and can be re-used for drilling. Re-grinding can be done until the desired cutting length is available on the annular cutter.
No pre-step drilling is required; holes are cut in as little as 15 seconds
Features
Annular Cutters cut only the periphery of the hole,ejecting the remaining center as a slug.It produces accurate burr-free holes to close tolerances without pre-drilling or step drilling.
Best used with a drill press or magnetic drilling machine, both for their stability against high torque forces created by such a drill bit and lower RPMs compared to other types of drills. these cutters can be easily used with light duty drilling machines or portable magnetic base drilling machines.
Aplication
Suitable for working with both ferrous and non-ferrous metals,cast iron, stainless steel, aluminum,copper,and plastic,wood, in either plate.
Annular Cutters can also be best used to make holes in pipes and tubes. Annular cutters help make holes in pipe and tubes without dimpling and deburring.
processing field such as engineering,rail transit, bridges, ships, machinery manufacturing, aerospace. Mild & Structural Steel.
Attention
During the drilling process, the pilot pin will retract into the cutter allowing lubrication to reduce heat gain in the slug.
Insert the ejector pin inside the annular cutter,never use an annular cutter without an ejector pin.
Using lubricant or coolant with any type of annular cutter is a must. A correct lubrication and coolant delivery more life for annular cutters.
HSS annular cutters required Cutting oil, not coolant.