![24V 8mm Shaft Worm Gear Moto](https://images-na.ssl-images-amazon.com/images/G/01/x-locale/common/grey-pixel.gif)
Motor Considerations
1. When USING A motor, there should be no restrictions, such as drag agent not flowing through the rotating shaft to the bearing, which hinders motor operation.
2. Shaft rotation can have the opposite effect on the life of the motor. To extend the life, check if your load is in accordance with regulations and should not be overloaded or hung on the end of the shaft to hinder rotation.
3. Made in eccentric heavy radiation load, detrimental to motor life.
4. Do not store around high temperature or extreme humidity, nor place in corrosive gas, which may reduce the effect of the motor.
5. Do not operate the motor at high temperatures and humidity.
6. When The positive and negative motor terminal of the power supply is to be soldered, the iron temperature is 340℃±40℃ and The heating time is less than 3 seconds. The plastic can not be deformed. in The work, The welding point flows to The motor or The end of the wire is broken, which will make The motor function deteriorate.
7. Do not allow the motor shaft to jam. when electricity is introduced, the motor will overheat and its accessories will burn out in a short period of time.
8. Prescribed electricity supply, safe within measurable requirements.
9. Installation of pulleys or gears, do not increase abnormally when pressing.
10. When installing the motor, the screws are too long, causing contact between the motor and rotor, which affects the characteristics.