Feature(may vary by option.)

●【PIR Intelligent Sensing】With PIR motion sensor, it can detect human movement by detecting infrared ray emitted by human body. Intelligent sensing, it will automatically delay to shut down after the person leaves.
●【Stable Sensitivity Sensor】Built-in temperature compensation chip, reducing the impact sensing distance by the temperature. 120 degrees cone angle detecting range, High and stable sensitivity, effectively save energy and improve efficiency.
●【Adjustable Delay Time】Please set it to the minimum value first, and then try to find out the value of your sensitivity and light sensor, which will save you time; Delay time controls how long the light stays on after being triggered, and the delay time is 15 to 360 seconds, which can be set by yourself
●【Wide Application】PIR Motion Sensor Switch for automatic lighting corridors, corridor, bathrooms, basements, warehouses, garages and other places, automatic ventilation exhaust fan and other electrical automatic control and other functions.
●【Package & After-sale Service】You will receive 4pcs mini Pir motion sensor switch with DC coupler cable. If you have any questions about the motion sensor switch, please feel free to contact us,we will provide you with a satisfactory solution.

[Pir Motion Sensor Switch]

[Pir Motion Sensor Switch with DC Cable]

[2pcs Pir Switch(black+white)]

Description

Specification

1.Product Name: Mini Pir Motion Sensor Switch

2.Operating Voltage: DC5V ~ 24V

3.Load Current: 5A

4.Delay Time: 5~10 Seconds, adjustable

5.Detecting Range: 120°

6.Detecting Distance: <8M, adjustable

7.Working Temperature: -15°C~38°C

8.Size: 50 * 26 * 21.5mm / 1.96 * 1.02 * 0.84inch

9.Trigger Way: Continuous triggering

10.Light Sensor: 20LUX

11.Color: White

Package Included:

4 x Body Infrared Motion Sensor with DC Coupler Cable

4 × 3M Sticker

8 × Typical Screws

Warm Notice:

1.Dont exposed to direct sun light or lighting, big wind, near a heater or air condition

2.Dont fix it at a place where there are obstructing material (eg. Glass, dense clothes) which IR cannot get though

3.Dont fix it in strong shock or vibration environment

4.The PIR Sensor requires a "warm-up time" in order to function properly, about 10s to1min,depend on the delay time; during this time, the signal triggered by the module is not stable, after one minute, it will be ready

5.The sensitivity for left-right direction is better than up-down direction, make sure the installation direction is left-right