Features:
- Professional high and low frequency divider, greatly improve the sound effect of the speaker, reasonable layout, beautiful appearance, fine workmanship.
- Large bass inductance + Non-polar capacitor + MPT metal capacitance + Treble protector.
- The Large bass inductance of 66mm enables the low frequency signal to pass quickly, reduce the calorific value, show the frequency response, and make the low frequency more full. The 16mm professional frequency divider is adopted, and the effect is far better than the traditional 8-12mm.
- 250V metal film capacitor, treble part uses WEAH250V4.7uF metal film capacitor with treble protection device. The large inductance is used at low frequency to make the low frequency fuller, the Non-polar capacitor 4.7uF filters out the high part of the low frequency to make the low frequency more pure and outstanding.
- The input of frequency divider can be directly inserted into the wire clip, convenient to use. Compact size, easy to install.
Specifications:
Out Power: 100W
Voltage: 12V
Model: D226
Impedance: 6 - 12Ω
Frequency Range (Hz): 48Hz - 20KHz
Material Type: ABS + Metal
Type: Audio accessories
Color: As picture shows
Size: 74*60mm/2.91*2.36inch
Inductance Length: 66mm/2.6inch
Net weight: 145g/0.32lb
Function: DIY for treble and bass of speakers:
- It is able to separate mixed and mixed analog audio signals into treble, midrange and bass, then send them to the corresponding high, middle, and woofer horn units for playback, so as to improve the sound effect.
Application: The divider is suitable for a speaker(8 inch below 1000W) can paly high pitch, and low pitch; The horn is suitable for 6 ohm, 8 ohm, 12 ohm, etc
Note:
Different production batches, different capacitance colors, the same function and effect, mind carefully.
Package Includes:
2 x Frequency Divider