Feature

●Attention: This Dent Puller Item does not include glue gun and glue sticks, we suggest user purchase hot melt glue gun and hot melt glue sticks to work with it. Also, it is effective on thin metal surfaces and is not suitable for metal surfaces exceeding 1mm.
●Physics design - Using the principle of leverage to design the dent puller is ergonomic, the dent bridge puller with a unique arched bridge can adjust the spacing and rotate the button to better fit the dents, the efficient and labor.
●Widely used - Suitable for any auto dents, repair door dings and hail damage and other dents. Efficient action on automobile, refrigerator, washing machine and other metal surface dents.
●Package information: 1PC Double pole bridge dent puller, 5pcs Black puller tab, 5pcs Blue dent puller tab, 2pcs Glue shovels, 1pc Empty bottle, 1pc Black clean cloth (Note: not glue gun and glue include)
●Customer Service - Please read the product description and manual carefully before use. Contact us through Amazon for any questions, We will help you solve your issues. (Note: Please do not trust any third-party information to avoid being deceived, We only service through Amazon.)

Description

Two Molds of Using:

1 .For small dent and soft surface (Not suitable for metal surfaces exceeding 1mm.)

2 .For deep dent(But cant exceed 20mm depth)

Before & After

Car Dent Puller with Bridge are ideal car dent removal, door dings and hail damage repair, minor dent removal .The dent remover kit great to work for the sheet metal processing of truck, automobile, refrigerator, motorcycle body, washing machine and other metal surface dents.

Easy to use: (Suit for dent&ding and home DIY repair)

Step 1. Clean dent surface.

Step 2. Put the glue sticks to gun and heat, connect the power source and preheat for 5-10 minutes.

Step 3. According to the dent size to choose the Glue Puller Tab, then put the heated glue on puller tab, immediately place puller tab in the center of the dent and hold on until it sticks.

Step 4. Let the glue cool for about 5-8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter.

Step 5. After the glue cooling,use a golden dent lifter or bridge puller to align and press the puller to pull up the dent. Repeat the above steps until the dent disappear.

Step 6. After finishing the dent,use the alcohol or hot water to clean the glue which on the car and the puller tabs.

Packing List:

1× Double Pole Bridge Dent Puller

5× Black Glue Puller Tabs

5× Blue Glue Puller Tabs

2× Glue Shovel + 1× Empty Alcohol Bottle

1× Black Clean Cloth + 1× Instructions Card

Packing List:

Product information