Far and away, the largest hurdle for people converting to a waxed drivetrain has always been the need to completely strip the factory lubricant from the chain in order for the wax to properly adhere. Traditional methods have involved using 2-3 different solvents and rinse steps, moving from non-polar solvents that thin greases and oils to progressively more polar solvents that evaporate quickly to eliminate residues.
For the design of SILCA Chain Stripper, we started from the end and worked backwards, identifying chemicals which drive out greases and oils while promoting wax adhesion to metal. The result is an organic cleaner that lifts and encapsulates greases and oils allowing them to easily be rinsed away from the metal surface. The result is the worlds first wax optimized chain cleaner which not only removes greases and oils, but actually primes the metal surface for improved adhesion from wax lubricants.
What is it: SILCA Chain Stripper is a highly concentrated degreaser combined with a wax adhesion promoter (primer) which allows for fast, single step preparation of factory chains for waxing while also improving wax adhesion and increasing longevity. SILCA Chain Stripper reduces the time and number of chemicals required to properly prep a factory greased chain to less than 10 minutes and can even be used to prepare chains on bicycle for drip wax application.
|
|
|
---|---|---|
Un-Packing your bundle4oz bottle of SILCA Chain stripper with Applicator tip. This allows for easy on the bike application, However for the best results we recommend removing the chain from the bike and adding to a jar to be agitated. 4oz bottle of Super Secret - The first of our Wax based lubricant and multiple award winner for watt savings and component wear prevention. The best product to protect and silence your chain |
How To Strip your chainFor hot-melt waxing a new, factory chain with SILCA Secret Blend Hot Melt, simply immerse the chain in the Stripper and agitate 30 seconds. Allow to sit for 5-10 minutes and agitate again for 30 seconds. Remove the chain from the Stripper and rinse with water and then drop the chain directly into the hot wax, the water will boil off within a few minutes and the chain will be fully waxed with up to 30% longer application life than a chain cleaned by traditional methods. |
When to re-lube chainAfter removing all factory grease or road contamination apply 1 drop of super secret to the chain and then using your fingers massage the lube into the chain and let the chain sit for 24 hours after initial chain lube application so that the liquid wax can fully cure before the first ride. Re-applying the lube to the chain requires an overnight wait before the next ride. |
Available as a bundle of 4oz bottles or as a 16oz bottle, either is an inexpensive way to improve the efficiency and cleanliness of your cycling drivetrain.