Feature(may vary by option.)

●Package includes: 1 pcs bonnet and poppet repair kits with bonnet, stem, spare rubber ring, spring, lubricant, poppet, gasket, e-ring.
●Suitable for:Fit for Febco 765 CBV 1/2", for Febco 765 DBV 3/4" for part number 905-211 backflow preventer, pressure vacuum Breaker. Note: Please check that part number 905-211 is the correct part you need before placing your order.
●Material: Made of high quality material, lead free, strong sealing and long service life.
●Easy to install: The bonnet can be installed by simply twisting it by hand. To facilitate installation, it is recommended that the included lubricant be applied to the bearings and threads before use.
●After-sales service: If the product has any quality problems, we will provide 30 days return service.

[BP212-2PCS]

[BP211-1PCS]

[BP212-1PCS]

[BP212-4PCS]

[BP211-2PCS]

Description

Specifications:

--Colour: Yellow
--Part Number: 905-211
--Material: ABS
--Fit for FEBCO 765 CBV 1/2"
--Fit for FEBCO 765 DBV 3/4"

How to install?

1. Close the inlet and outlet shut-off valves to drain the residual water.
2. Remove the old bonnet and poppet and place the new poppet into the chamber.
3. Unscrew the nut from the top of the bonnet.
4. Put the bonnet post through the bonnet hole and turn it clockwise to fix the bonnet and poppet together.
5. Put the nut on the bonnet and tighten it.

Note:

A. In a few cases, if the problem of not tightening occurs, it is recommended to apply lubricant to the bonnet area as well as the threads. A wrench can also be used to tighten it properly. Do not over-tighten and cause damage to the product.

B. After the installation is completed and the inlet valve is opened, splashing is normal, and the splashing will stop after the device is pressurized.