Feature(may vary by option.)
●【Easy to Use】The patented design, different from the ordinary rail connector, does not require the tedious tightening of screws, just insert the rail terminal into the 35mm iron and aluminum DIN rail, lift the orange clip, insert the wire into the hole until you feel the resistance, then lower the orange lever and complete the operation, saving 70% of the operation time.
●【Perfect DIN Rail Terminal Blocks Kit】Terminal blocks kit comes with 40pcs 12AWG terminal blocks, 4pcs connection bar, 4pcs digital identification, 2Pcs Fixed clamp,40pcs screws, 2pcs end stopper bracket and a transparent storage box.
●【Universal Compatibility】 This Wire Connector is suitable for solid and flexible wire. Connect any combination of solid, stranded, and flexible copper wires. Suit for solid wire 0.08-4.0mm² /28-12 AWG, flexible wire 0.5-2.5mm² /20-14 AWG. It is widely used in distribution boxes, control cabinets, switchgear, complete sets of equipment, machinery etc.
●【Premium Quality】Terminal blocks, high quality brass metal body and the best flame retardant insulating material modified nylon PA66 shell, it has a long life, no corrosion, anti-aging, 4KV and shock resistance, strong structure firmly locked to DIN rail.
●【Buy With Confidence】Every junction independent shrapnel, different wire managed separately, different diameter can be connect security, there are test hole in every cage surface, electric test no need to remove tape. If there is anything you are not satisfied please feel free to contact us and we will offer you a replacement or full refund. High-quality products and service is our priority.
[10 pcs connectors]
[20 pcs connectors]
[40 pcs connectors]
Description
Color:40 pcs connectors+4 pcs Article in parallel+4 pcs Digital identification+40 pcs screw
UOHGDPY the patented design, different from the ordinary rail connector, does not require the tedious tightening of screws, just insert the guide terminal into the 35mm iron and aluminum DIN guide, lift the orange clip,
insert the wire into the hole until you feel the resistance, then lower the orange lever and complete the operation, saving 70% of the operation time.
Specifications:
➤Terminal Blocks UK5N: It can connect two conductors with ease, even large conductor cross sections are not a problem. Can be used on DIN Rail 35mm, steel or aluminum.
Material: Nylon PA66 Housing + Brass Metal Bodies Rated voltage: 250V. Rated current: 32A Solid Wire (AWG/mm²): 28-12, IEC 0.08-4, Flexible Wire(AWG/mm²): 20-14, IEC 0.5-2.5.
➤End Stopper Bracket: Terminal fixed component mark clamp and marl strip could be blocked onto it to mark it, additionally, it could be used as fixed component to terminal rows termination
➤Package Included: 40 x Terminal Blocks 4 x Connection Bar 4 x Digital Identification 40 x Screws 1 x Transparent Storage Box.
Warm note:
1. Due to the light and screen difference, the items color may be slightly different from the pictures.
2. Please allow 0.5-2 cm differences due to manual measurement.
How to use the wire nuts:
1.Strip off the housing of wires to 0.35-0.40inch
2.Push the orange levers to 90°,and make sure that wires are plugged into the end.
3. put the levers back.
40 pcs screw