[Tools]
The Proxxon Hot Wire Cutter Thermocut. The large table with 15 11/32" x 11" (390 x 280 mm) and the working surface of the Aluminum Cobond compound ensure smooth and easy movement of the workpiece. The printed grid and protractor assist with division and cutting. The solid aluminum overarm has a 13 3/4" (350 mm) throat and offers 5" (140 mm) in height. The 5 1/2" holder and wire coil (98 ft, 0.008" diameter is included) may be shifted and adjusted along the overarm to enable miter cutting. An LED indicates operation and helps prevent burnt fingers (the cutting wire heats to the maximum temperature in less than 1 second). Note: The correct temperature, being dependent on material and thickness, is learned from experience. Optimum profiles are cut at lower temperatures while applying less cutting force.
Proxxon micromot hotwire cutter thermocut - Ideal for architects, designers, decorators, artists, and teachers and for building architectural models, prototypes, as well as classic model railroad, plane and boat items. The large table with 15-11/32-Inch by 11-Inch ensures smooth and easy movement of the work piece. The printed grid and protractor assist with the division and cutting. The solid aluminum over arm has a 13-3/4-Inch (350mm) throat and offers 5-1/2-Inch (140mm) in height. The holder and wire coil (one spool of wire 98-Feet, 0.008-Inch diameter is included) may be shifted and adjusted along the over arm to enable miter cutting. An LED indicates operation and thus reminds you not to touch the hot wire to prevent burnt fingers (the wire heats to maximum in less than 1 second).