Feature

●6 Head Ultrasonic Mist Maker is suitable for indoor and outdoor pool fogging, covering the pool area of 2-3M2, and is suitable for a fixed water depth of 7-9cm. The water depth should be submerged around 1cm of the sensor head to ensure the normal operation of the mist maker.
●[Wide Range of Application]: 6 Head Ultrasonic Mist Maker is suitable for rockery, stage, garden, pond fogging; restaurant landscape fogging.
●[Safe & Easy to Operate]: Place the Ultrasonic Mist Maker in the water with the front facing up, and plug in the power supply to create a lot of mist. When the item is short of water during operation, it will be powered off automatically, safe and reliable.
●[Environment Protection]: The Mist Maker does not need to be heated or uses chemical. It adopts electronic over-frequency oscillation with an oscillation frequency of 1.7MHz, which will never harm humans and animals.
●[Halloween Party]: 6 Head Pond Fogger can create smoke on Halloween or other festivals, presenting a different holiday atmosphere.


Description

6 head mist maker fogger6 head mist maker fogger

SIMPLE USE & SAFE USE - Best Efficiency Makes Out of Simple Tips

NOTE: The machine is safe and simple to use, but there are some safety issues associated with using the machine irregularly or excessively. To use the machine more effectively and safely, please try the following tips as much as possible, which are simple but will greatly ensure using safety and increase the life of the machine.
Tip01: Please do not place the Transformer and other Cable Connecting Parts into the water!
Tip02: The Mist Making Board works nicely in about 2.75inch/7cm water depth. When the water is deeper than 3.9inch/10cm, please use a buoy. Please pay attention to the model when choosing a buoy. It is best to use tap water without essential oil.
Tip03: Please use the mist maker no exceed 10 hours at most a day, working overload will badly shorten th service life.
Tip04: The degradation of the ceramic discs will cause water leaking-in, please clean the ceramic discs with cloth regularly (depending on the using frequency) and replace with the new discs in time.
Tip05: When replace the ceramic discs, please make sure the cavity is dry, and tighten the ring to prevent accessories loose resulting in water leaking-in.
Tip06: If you have problems with the products or have any question, please let us know.

What is the ultrasonic frequency?

Mxmoonants entire series of mist maker use 1.7MHz ultrasonic frequency.

Is it possible to control the amount of fog emitted?

The ultrasonic fogger adopts a constant mist output, and the mist output cannot be adjusted in any way.

Can the range of the water mist be controlled?

Under normal circumstances, the humidification range of the pond fogger is small. If you want to extend the humidification range, you can add a fan to blow the mist out of the container.

Can one power supply connect multiple mist maker boards?

No, the power of a single power supply cannot satisfy multiple mist maker boards.

6 Head Mist Maker

More Mist Maker Models

4200ml/H

Maximum Evaporation

7000ml/H

18*8.5*5.2cm

Size

28*8.5*5.2cm

250W

Power Supply

400W

110V, US Plug

Voltage

110V, US Plug

Package with Float

Package with Discs

4200ml/H

Maximum Evaporation

8400ml/H

18*8.5*5.2cm

Size

32.3*8.5*5.2cm

250W

Power Supply

400W

110V, US Plug

Voltage

110V, US Plug

Package with Float

Package with Discs

Learn More
Learn More

Product information