Feature(may vary by option.)

●1/4-20 threaded insert x 15mm length, 6mm allen wrench included, best 1/4"-20 threaded insert wood insert furniture screw in nut connector screws.
●Insert head ⌀: 0.461" / 11.7mm, body ⌀: 0.315" / 8mm, threads ⌀: 0.410" / 10.4mm.
●Threaded inserts are easy to install, simply drill the right size hole and Install with hex key provided.
●In Softer wood, the outside threads cut easily into the wood, simply drill a Appropriately Sized Hole (8.5mm, 9mm, 9.5mm, 3/8" drill bit) for the body of the insert, then screw insert into the place.
●In very Harder wood such as white oak or maple, drill a hole size (3/8", 9.5mm, 10mm drill bit) that close to the outside threads diameter, then screw insert into the place. If the drilled hole is too small for the threads, screwing it in MAY split the wood or insert.

[1  & 4-20 x 15mm]




[1  & 4-20 x 10  & 15  & 20mm*150pcs]




[5  & 16-18 x 20mm]




[1  & 4-20 x 20mm]




[1  & 4-20 x 10  & 15  & 20mm*60pcs]




[1  & 4-20 x 10mm]




[5  & 16-18 x 15mm]





Description

  • Wood Threaded Inserts are insert nuts that go into a predrilled hole in wood and has internal threads.
  • These wood insert nuts feature threaded designs, external protrusions bite into the wood, providing superior holding power and preventing the insert nuts from either turning or pulling out in all applications.
  • Our inserts work great with soft woods and hard woods.
  • For wood applications requiring a threaded-in insert, consider our quanlity inserts and you will be suprised by our products.

Pack of 40 1/4-20 Threaded Inserts for Wood

threaded insertthreaded insert

Screw in threaded inserts are best for softer woods plywood and hardwood, their outer threads cut easily into your wood applications, you just need to drill a hole that the size of the body into the wood for the threaded insert.

threaded insertthreaded insert

  • Length: 0.591" (15mm).
  • Body Φ: 0.315" (8mm).
  • Threads Φ: 0.410" (10.4mm)
  • Recommended Drill Bit for Soft Wood: 9mm Bit, If Small, Try 3/8" Bit.
  • Recommended Drill Bit for Hard Wood: 3/8" Bit, If Small, Try 10mm Bit. (Be careful with hard materials)
  • ◤Note:◥ For Reference Only, as best practice varies between your applications, the size of Drilling Hole Depends on the Hardness of Your Wood.

threaded insertthreaded insert

  • For wood applications requiring a screw-in insert, consider our threaded Insert, they are inexpensive solution for reinforcing threads in hard woods, soft woods, and plywood.

threaded insertthreaded insert

  • These wood threaded inserts are easy to install, simply drill the right sized hole and thread the insert into place using a screwdriver or a 6mm allen wrench.

threaded insertthreaded insert