Feature

●✔Product type: DC Gear motor with two-channel Hall effect encoder; Rated Voltage: 12V; No-Load Speed: 130RPM; No-Load Current: ≤ 0.15A; Rated Torque: 1.2kg.cm;
●✔Main Body Dimensions: 68 x 25mm / 2.68in x 0.99in (L*D); Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off;
●✔Single Output 540 Pulses Per Revolution: Gear Reduction Ratio: 1/45, Each Loop Output Pulses: 12PPR 45*12=540PPR;
●✔Wiring Diagram: Red - Motor power terminal (+); Black - Motor power terminal(-); Green - Quad encoder Ground; Blue - Quad encoder +5V Vcc; Yellow - Quad encoder A signal; White - Quad encoder B signal;
●✔Application: Suit for Projects Such as Robotics, RC Car Model, Custom Servo, Arduino and 3D Printers, DIY Engine Toy.

Description

Advantage:

High quality metal material, small size, high torque;
Excellent thermal conductivity, high hardness and anti-friction, very small sound;
High quality motor with a long lift about 1000 hours;
The new Hall encoder has a cover to prevent dust, durable and not easy to wear;

Characteristics:

The rear of the motor is equipped with a dual channel Holzer effect encoder, AB dual output, single circuit per cycle pulse 12PPR, double down the road, a total output of 48CPR. Phase difference 90 degrees.
The two-channel Hall effect encoder is used to sense the rotation of a magnetic disk on a rear protrusion of the motor shaft. The quadrature encoder provides a resolution of 48counts per revolution of the motor shaft.
To compute the counts per revolution of the gearbox output, multiply the gear ratio by 48.

Sweet tips:

1.Be sure to keep the wiring connection correct before Working;
2.Be sure to keep the motor stopped before change the CCW/CW direction; Or the motor will be burned!!!

Application:

Smart balance car, rc car model, robot;
smart home appliance,camera swing, tape machine;
Custom Servo, Arduino and 3D Printers,DIY Engine Toy;
electric toothbrush, medical equipment, laboratory equipment, etc.