Feature
●SMART PWM TECHNOLOGY: The controller compatibility with 12V and 24V system, Discharge Current: 30A; dual USB output 5V / 2.5A, Build-in industrial microcontroller for automatical management, memorizing various parameters set by the user and the data wont be lost when the battery runs out, suitable for lead-acid batteries: OPEN, AGM, GEL. Controller mode: b1: lead-acid. b2: ternary lithium. b3: Lithium iron phosphate.
●FUNCTIONAL LCD SCREEN: Easy to install and operate, Intuitive LCD display that can clearly indicate the status and data is able to switch modes and parameter configuration, The level of complete power-off is adjustable, which can perfectly protect the lithium battery from over-discharge, suitable for home, industrial, commercial etc.
●3-STAGE PWM CONTROL CHARGING: Fully 3-stage PWM regulation charging using direct charge, lifting charge, floating charge three-stage PWM regulation charging mode. Using the controller to realize efficient and fast intelligent charging, and effectively prolong the service life of the battery.
●MULTIPLE INTELLIGENT PROTECTION: Built-in overcurrent protection, short circuit protection, reverse connection protection, open circuit protection, all automatic recovery, no damage to the controller, a reliable protector for your devices. If the battery voltage is lower than 8V, the solar controller will automatically shut down to protect the battery life
●CONFIDENCE SERVICE: Our brand WERCHTAY team has complete after-sales service, and the product comes with an instruction manual. If you encounter problems, please contact our team. We provide one-year warranty and lifetime after-sales service.
Description
WERCHTAY Solar Controller
30A Solar Charge Controller:
1: LCD display 2: Automatic identification 12V/24V 3:High performance chip
4: Automatic memory data storage 5: Multiple intelligent protection
6: PWM charging 7: Simple and easy to install
System connection
1. Connect the positive and negative terminals of the battery to the controller according to the figure, and the controller will automatically detect the battery voltage.
2. Connect the positive and negative poles of the load to the controller according to the diagram, and be careful not to reverse connection.
3. Connect the solar panel to the controller as shown in the figure.
Panel status indicator and setting
Menu key: Switch to the parameter screen, or hold down the function key to enter or exit parameter setting
Flip up: On the parameter setting screen, tap once to add one step to the parameter
Flip down: On the parameter setting screen, tap once to lower the parameter one step down
Browsing interface: Press the menu key to browse various aspects and parameters
Set parameters: On the screen 2-5, hold down 55 to scroll up to enter manual setting. At this time, the numbers will blink. Press up or down to adjust parameter values
|
|
|
|
|---|---|---|
|
USB charging life, support most USB port devices in the market. Thickening the heat dissipation backplane to improve the heat dissipation performance of MOS tube close to the heat dissipation design. |
Standard size PBC board, four screws fixed PBC board, electronic components stable performance, Dual mosfet Reverse current protection, low heat production. |
The connecting port with large section and large spacing can be installed with 6mm wire. The spacing of 9.5mm increases the insulation performance and the possibility of installation, effectively reduces the voltage drop of the circuit and reduces the loss. |
|
|
|
|
|---|---|---|---|
| 30A MPPT Solar Charge Controller | 60A MPPT Solar Charge Controller | 60A Solar Charge Controller | |
| Customer Reviews |
205
|
264
|
54
|
| Price | $19.99 | $22.99 | $9.99 |
| Electric Current | 30A | 60A | 60A |
| Voltage | 12V / 24V | 12V / 24V | 12V / 24V |
| Color | Blue | Blue | Black |
| Dual USB Charging | ✓ | ✓ | ✓ |
| LED Display | ✓ | ✓ | ✓ |