Feature(may vary by option.)

●Convert a Shopsmith 5/8" non-threaded lathe headstock spindle to 1" x 8tpi threaded
●Allows a 5/8" non-threaded spindle to accept 1" x 8tpi threaded chucks, faceplates, and other woodturning tools and accessories
●Made of steel; Weighs .65 pounds; Extends spindle length approximately 1-1/4"
●Includes set screw to lock the adapter to the spindle
●Flats allow for solid wrench tool grip for tightening and loosening from spindle; Wrench not included

[3 & 4 x 10tpi to 1 x 8tpi]

[1-1 & 4 x 8tpi to 1 x 8tpi]

[Shopsmith 5 & 8 to 1 x 8tpi]

[1-1 & 4 x 8tpi to 1-1 & 2 x 8tpi]

[1 x 12tpi to 1 x 8tpi]

[3 & 4 X 16tpi to 1 x 8tpi]

[M33 x 3.5tpi to 1 x 8tpi]

[1 x 8tpi to 1-1 & 2 x 8tpi]

Description

Converts your Shop Smith lathe spindle so that you can use chucks with a 1" x 8 tpi thread size. Adapts to your 5/8-inch no thread spindle to accomodate any 1" x 8 tpi female mount accessory. Made of steel, and has set screw to tighten to the flat on the spindle. Extends the spindle length over 1-inch.