Feature(may vary by option.)
●Bathroom faucet made of solid brass brush finishing ,lead free, durable and healthy
●Automatic faucet with infrared sensor, sensing distance 10-18cm. Put your hand infront of the sensing area, water will come out automatically. Remove your hand, water will stop. This is a sanitary and water saving faucet.
●Installation:single hole, deck mounte; Suitable deck thickness 20mm;Suitable hole diameter 20-30mm; with deck plate,mounting accessory and instruction manual included.
●Power:sensor powered by 4AA alikaline batteries(not included) which can last for 2 years for family use. The batteries should be installed in the control box. You have to prepare 4AA batteries in advance.
●Water type: for cold only bathroom, you just connect the faucet to the house supply pipe. For cold and hot water bathroom,you have to connect the water mixing valve(included) to adjust water temperature.
[Chrome]
[Nickle]
[ORB]
Description
HHOOMMEE Automatic Sanitary Ware
HHOOMMEE Automatic Touchless Sensor Faucet Motion Activated Bathroom Hands Free Tap (Brush Nickle)
Sensor Faucet Features:
- Water saving:water out automatically when you put your hands under the induction zone,water stops when put your hands back.
- Hygienic:hands free, no dirty hands by touching faucet.
- Hands free:micro-computer control.
- Soft touch:the aerator with technology of air in water,make water been soft touched and no splash.
- Energy saving:battery power,4AA alikaline batteries, can be used for around 2 years.
HHOOMMEE Sensor Faucet Parameters
- Power Supply:DC 6V,4AA alkaline Battery(not included),can last for 2 years for family use
- Sensoring Distance(factory setting):15cm
- Deck Hole Diameter:20-30mm
- Deck Thickness:30-45mm
- Deck Plate Length:6.3inch
- Flow Rate:8L/Min
- Cartridge Lifecycle:500,000 Times
- Water Pressure:0.05-0.7Mpa
- Switching Time:less than 0.7s
- Low Battery Indicator:Red Led Flash
HHOOMMEE Automatic Faucet Details
|
|
|
|
|
|---|---|---|---|
Infrared SensorFactory setting sensing distance is 15cm. Put your hand within this distance, water will flow automatically. Remove your hand, water will stop. This motion sensor faucet will make your washing cleaning and convenient. |
Faucet AeratorThe faucet aerator with soft water flow,no splash,water saving.
|
Faucet and Deck PlateFaucet is made of solid brass with chrome plating. It comes with a deck plate. Plate length is 6.3 inch. It is suitable for single hole basin. If your are using an 8 inch 3 hole basin. You have to prepare another longer plate in advance. |
Mounting HoleIts a single hole bfaucet. The faucet stem length is 70mm. The suitable deck thickness is 35--45mm. The stem diameter is 20mm. Suitble deck mounting hole diameter is 20mm-30mm. |
Package Content
Sensor faucet is packed with thick foam and color box. You will receive it in good condition with all faucets accessories included:
- 1x faucet body with deck plate (cover deck holes)
- 1x control box
- 1x water mixer valve,brass with check valve
- 2x 1/2-9/16 water supply pipe, with red and blue mark(red one for cold water, blue one for cold water)
- 1x 1/2-1/2 water pipe (for mixing water)
- 4x mounting screws (fix control box on the wall)
- 1x instruction paper
How to install the faucet?
HHOOMMEE Faucet Installation
Before Installation, you may need these tools: electrodrill,screwdriver,hammer,spanner,pencil.
Install the faucet according to the following steps:
- Step 1: Mounting the faucet on the deck and fasten the nuts on under the deck.
- Step 2: Put 4 AA alkaline battery in the battery case (batteries are not included in the package).
- Step 3: Fixing the control box on the wall.
- Step 4: Connect water mixing vale to the control box (mixer valve outlet to control box inlet).
- Step 5: Connect the water hoses (cold water hose marked blue, hot water hose marked red, mixing water hose without color).
- Step 6: Connect the sensor signal wire