Feature
●If the oil cannot be pumped after the oil change pump is started, please do not start it all the time to prevent overheating from damaging the oil change pump. Please use the product according to the instructions
●【SAFE OPERATION】- Except for engine oil and diesel, the oil pump must not draw any flammable liquid or water to avoid accidents. Before use, be sure to heat the car engine to 104 ° F-140 ° F, Avoid clogging the oil pump due to oil solidification.
●【ENGINE OIL CHANGE MADE EASY】 - DC 12V 100W has enough power, you only need to clamp the conductive clip on the motor and open the switch to start it, so that you can complete the oil pumping work smoothly and effectively, replacing the traditional oil change method and reduce tedious workload (diesel flow: 1.7L / m, oil flow 0.35L / m).
●【ACCESSORIES & PRECAUTIONS】- The oil pump has 2*outlet hose, 2*inlet hose, 4*hose locks,1*screwdriver, 1*Oil-proof gloves, 2*battery clips, 1*users manual. Please pay attention to the direction of import and export, positive and negative poles and lock hose lock before use. The suction power of the micro suction pump is limited. Please do not connect other extension tubes.
●【WARNING】: This product is NOT suitable for gasoline/petrol. Do not use this pump to extract water, gearbox oil or easy flammable liquids (fuel, petrol etc) If there is any problem with this oil pump, please contact customer service in time, and you will get a satisfactory result.
Description
Specifications:
· Motor Oil (40-60 degrees)
· Inlet Hose Length: approx. 155cm/61"
· Inlet Hose Outer Diameter: 6mm/0.236"
· Inlet Hose Inner Diameter: 4mm/0.157"
· Sound Level: 70 dB(A)
· Vibration: <2.5m/s2
· Outlet Hose Length: approx. 1245cm/49"
· Outlet Hose Outer Diameter: 12mm/0.472"
· Outlet Hose Inner Diameter: 10mm/0.39"
· Line Length: approx. 70cm/28
Package Included:
1 x oil change pump extractor
2 x Outlet Hose
2 x Inlet Hose
4 x Hose Clamps
2 x Battery Clam
1 x screwdriver
1 x Oil-proof gloves
1 x users manual
Note:
1. NOT suitable for extracting: water (no lubrication of the pump), gearbox-oil (too viscous) and easy inflammable liquids (petrol, gasoline, etc.)
2. The working-period for this oil-extractor should not exceed 30 minutes. we recommend a short break after 10-20 minutes continuous usage to allow the unit to cool.
3. Do not pump fuel, petrol, paraffin or other easily en-flammable liquids-Danger! Do not pump water(no lubrication of the pump). Only pump warm motor-oil(40-60degrees) do not pump off motor-oil.
4. If you want to connect this pump to AC power, you will need a power converter.
5. If you have not used it for a long time, it may have no suction, then just pour the water in the pump, and run the pump for a few minutes until the air is all out.