Feature(may vary by option.)
●[Efficient Equipment]: This 12V, 8.27"L x 7.09"W x 3.54"Hoil pump has a powerful force of 60W. Drawing 5A of current, its motor delivers 0.8-1.0 liters/min flow rate while operating steadily and silently. It’s very portable and can be used anywhere without location limits, empowering convenient oil changes wherever desired.
●[Easy Installation & Safe]: First connect the hoses inlet and outlet to the oil inlet and outlet, and then connect the power clip with a red positive link and a black negative link to the car battery. Clamp the conductive clip, and press the button again. The operation of the oil transfer pump is very simple, and you can run your engine smoothly by yourself.The motor adds an overcurrent protection device to prevent the oil pump from burning out during long-term use.
●[Usage Guide]: Before using the oil pump extractor, you need to start the motor to warm the oil to 104°F-140°F. Then shut down the motor before pumping. It cannot be used for gasoline/petrol, water, gearbox oil, or flammable liquids (fuel, gasoline, etc.). Before use, please pay attention to whether the inlet and outlet directions correspond correctly to the hoses and positive and negative poles, and lock the hoses. Press the button only after all connections are installed. It is best to use the device for no more than 30 minutes.
●[Full Accessories]: The set of Motor Oil Diesel Fluid Transfer Pump contains an 8 x 7 x 4 inch, 1 pound oil change pump along with the following accessories: a 1.5 meter outlet hose, a 1.2 meter inlet hose, 2 hose locks, and 2 battery clamps.
●[Wide Application]:This 12V transfer change oil pump doesn’t have complex workflows, and can easily remove oil scavenged in the tube from cars, motorcycles, RVs, boats,trucks, quad bikes, and lawn equipment at any time. It is also an excellent choice for changing the oil in scooters, ships, marine trucks, tractors, truck forklifts ,and more.
[12V 60W]
Description
Extracting motor oil from your vehicle without Mess & Specialised.It can be used for your Car, Motorcyle, Scooter, Quad Bike, Truck, Boat, Forklift, Generator, Tractor, Ride On Mower Etc Siphon & Transfer Diesel To Cars, Trucks, Ships, Boats, Tractors, Farm Machinery, Plant Equipment Etc.
WARNING: This product can not use to extract water, gearbox oil or flammable liquids(such as fuel, petrol, gasoline)
If the product have any problems, well give you a free-return.
- Specificaiton：
- Input Voltage: DC 12VMotor Oil
- Wattage: 60W, Current: 5A
- Flow Rate: approx. 1L / min
- Diesel or heating oil: approx 250 L/H
- Sound pressure level:70dB(A)
Note
This high efficient self-priming oil extractor pump is easy to pump various fluids and oils. But pls note that NOT suitable for extracting: water (no lubrication of the pump), gearbox-oil (too viscous).
Easy to Use
- Warm up the engine for about 5 minutes to reduce the oil viscosity. Its important that the engine oil is warm (not hot) when extracting.
- Turn off the engine and loosen the filler cap (for the time being)
- Connect the power clip of the pump body directly to the battery
- Remove the oil level gauge and insert the thin hose of the pump. (Notice if you put it to the innermost very quickly,it wont work)
- Gradually insert the hose while operating the pump.
- When it is inserted to some extent,the operating noise will change and the oil will start to be sucked up.
- Put the thick discharge hose on the waste oil tray. (If you put it directly in the waste oil treatment box, you will not know the amount of waste oil collected.)
|
|
|
|
|---|---|---|---|
| 12V 60W Oil Change Pump Extractor | 60W 12V Oil Diesel Fluid Pump Extractor | 80W 12V Oil Change Pump Extractor | |
|
|
|||
| Customer Reviews |
952
|
952
|
179
|
| Price | $21.99 | $20.99 | — |
| Color | Red | Yellow | Yellow |
| Wattage | 60W | 60W | 80W |