Feature

●Suitable for use on fishplate skateboards and longboards, the Slip Wire Spacer effectively separates the side nuts from the bearings, ensuring that they can be rotated independently of each other without affecting each other. With a thickness of 2mm, this spacer is ideal for skateboard sliding.
●Features a fast washer that increases the speed of the skateboard by reducing friction between the bearings, axle nut and hangar and extends the life of the bearings. It reduces extraneous friction, making the skateboard glide smoother and increasing the fun of skating.
●Measuring 8x11x12mm, this is a standard size flat washer for all 8mm axle skateboard/longboard trucks. Regardless of your skateboard/longboard truck type, almost every truck has a standard 8mm axle size.
●Features an axle spacer feature that prevents skateboard wheels from wobbling. If your wheels wobble a lot and you dont want to over-tighten the side nuts to avoid damaging the axle, then you may need to add more spacers to reduce the amount of wheel wobble and increase stability.
●To ensure a smoother glide on your skateboards/longboards, each skateboard requires a minimum of 8 smooth threads and thicker crafted slip wire spacers. These thickened slide wire spacers will increase speed and extend bearing life by reducing friction between the bearing and the shaft nut and hanger.


Description

Specification:
Product name: bracket end inner and outer rotary washers (slip wire)
Application scope: small fish board, slide board, long board, universal.
Product size: 8x11x12mm flat washer (thickened)
Note: Each skateboard needs at least 8 smooth threads and thickening process to ensure smoother sliding.
Product function: bridge pads prevent skateboard wheels from wobbling. If your wheels wobble badly and the side nuts dont want to be tightened too much to avoid damaging the bridge, you may need to add more washers to prevent the wheels from wobbling too much.
Advantage: The thickness of this slide wire is 2mm. it effectively separates the distance between the side nuts and the bearings, ensuring that they can rotate independently of each other without affecting each other.