Feature

●Feature: 1. The shaft can be disassembled at any time, no gap. 2.Tighten the loose joints from the bucket to the boom. 3. Prevent dust from entering your barrel pins - Pins that are heavily worn are more likely to enter dust. 4. Compared with metal gaskets, it has low friction and low noise.
●Easy to disassemble and install
●Color:Random distribition
●Package Including:One Bucket Pin Shim Kit 80mm*3mm


Description

Feature

gasketgasket

gasketgasket

gasketgasket

gasketgasket

Dismantle-free shaft, no gap can be superimposed.

Tighten the loose joints from the bucket to the boom.

Prevent dust from entering your barrel pins - Pins that are heavily worn are more likely to enter dust.

Compared with metal shims, it has low friction and low noise.

Widely applicable to a variety of small heavy machinery

machinemachine

Method of adding shims to the machine

  • When the bucket is connected, the bucket is put away and the bucket rod is extended outwards. Lower the boom so that the teeth are a few inches off the ground. This position is convenient for dimensional measurement.
  • After the O-ring is installed, push the bucket to one side and check the clearance between the other side of the bucket and the bushing of the bucket rod. The total clearance between the inner ear of the bucket and the end face of the bushing should be 0.2-0.7mm. If the gap is too large, it will produce noise and loose movement, leading to danger.
  • Push the bucket to the other side and check the clearance again.
  • Need to adjust, remove the bolts and pins, as needed, remove or increase the gasket, both sides should use the same number of gaskets, install bolts and nuts.

colorcolor

Color

Random distribution

Fitment Models:

For Bobcat:337, 341, 435, X335, X337, X341

For Case:580K, 580M, 580M Series 2, 580M Super M, 580M Super M Series 2, 590M Super M, 590M Super M Series 2, 695, CX 47, CX 47, 50B, CX 50B

For Caterpillar:304CR-ISJ, 305CR-ISJ, 304C CR, 305C CR, 307, 307C, 308, 308C, 428B Non HRL, 428C Non HRL, 428D HRL, 432D HRL, 432E HRL, 445D HRL, E 70B

For JCB:217S, 805-2, 806-2, 8052, 8060, 8080ZTS, 3CX, 3CX 9" Narrow Setup, 3CX std w/o G65 Bush, 4CX

For Daewoo:Solar 055, Solar 055V, Solar 055V PLUS, Solar 070, Solar 070-3, Solar 075-V, Solar 080-3, Solar 080W-3

For Doosan:S 55-V, S 75-V

For John Deere:310G

For Hitachi:EX 40, EX 45, EX 40-2, EX 40U, EX 50U, EX 55UR, EX 55UR Import, EX 58MU, EX 60, EX 60-3, EX 60-5 UK Version, Zaxis 40U, Zaxis 40U-2, Zaxis 50U

For Hyundai:R 55, R 55-3, R 55-7, R 55S

For Volvo:BL70, BL71, EC 55, EC50/W, ECR 58, MX 55/W, SE 50-3

For Kobelco:45SR-2, 50SR-3, SK 40SR-2, SK 40SR-3, SK 45, SK 45SR, SK 45SR-2, SK 45SR-3, SK 50SR-3, SK 50UR-2

For Komatsu:PC 40, PC 40-7, PC 40-7E, PC 40FR, PC 40MR-2, PC 40MRX, PC 40R-8, PC 45-1, PC 45R-8, PC 45R-8E, PC 50FR, PC 50MR-2, PC 50MRX-2, PC 50UU-1, PC 50UU-2, PC 58UU-3, WB 93-2, WB 97R-5

For Kubota:KH151, KH161-3, KH191, KX151, KX161-2, KX161-2S, KX161-3, KX191, RX501, U45, U48, U55, KX057, KX057-4

For New Holland:655, B 95, TC, LR, B110, B115, EH 50.B, LB 75, LB 75B, LB 90, LB110, LB115, B, NH 85, NH 95

For Yanmar:B 50, B 50-2, B 50-2B, VIO40-1, VIO40-2, VIO40V, VIO45, VIO45-5, VIO50, VIO50-1, VIO50-2, VIO55, VIO55-5, YB 50

For Samsung:SE 50-3, SE 50W

For Takeuchi:TB 45, TB 53FR, TB 53R, TB 145

For Terex:TX750, TX760, TX860

For IHI:40G/H/J, 45J, 45NX

Product information